12 — TASCAM CD-BT1MKII
Making connectionsConnecting a bass guitar (BASS
IN)
BASS GUITAR
Connect a bass guitar to the
BASS
IN
jack.
Set the
BASS IN
switch to either
PASSIVE
or
ACTIVE
at the side of
the unit a ccording to the type of
your bass guitar.
e
BASS IN
ja ck of the CD-
BT1MKII accepts unbalanced
input signals. Use a ¼ inch mono
phone plug.
Adjusting the input level
Use the
INPUT
control to adjust the
level of the input signal from the
BASS
IN
jack.
Inputting signals from external
devices (
LINE IN
)
e
LINE IN
jack accepts a stereo
mini-jack plug (3.5mm).
e input le vel at the
LINE IN
jack
cannot be adjusted on the CD-
BT1MKII, so adjust the output
level on the ex ternal device you
have connected.
LINE OUT OF EXTERNAL DEVICE
WARNING
NEVER connect a bass guitar amplifier to the
CD-BT1MKII’s
BASS IN
jack, as you will
damage your equipment if you do this.
Adjusting the output level after
adding built-in effects
Press and hold down the
EFFECT/
EDIT
key to open the Effect menu, and
press the
NEXT
or
PREV
key to choose
LVL
and use the
UP
and
DOWN
keys to
set the output level between 0 and 64.
Adjusting mix balance between
bass guitar and CD
Press and hold down the
TUNER/
SETUP
key to open the Setup menu,
and press either the
NEXT
or
PREV
key
to choose
MIX
. You can set the mix bal-
ance using values between B (Bass) 10
– B1, 0, C (CD) 1 – C10.