Tascam D00851300A Facts and gures (specications)

TASCAM CD-BT1MKII — 25

(continued from the previous page)

Footswitch polarity

is function allows you to set a polar-

ity suitable for the footswitch that you

are using.

Select

POL

in the Setup menu, and set it

to either

NOR

(NORMAL) or

INV

(IN-

VERT) by pressing either the

UP

or

DOWN

key.

Facts and ﬁgures (speciﬁcations)

Disc types 8 cm single, 12 cm

CD

AD/DA 16-bit

Nominal output level

(LINE OUT)

–10 dBV

Maximum output level

(LINE OUT) without

distortion

0 dBV (1 Vrms)

Output impedance 1 kΩ

Maximum output level

(PHONES)

> 18mW (into 32$)

Nominal input levels

LINE IN

BASS IN

–10 dBV

–15 dBV (Passive)

–10 dBV (Active)

Voltage requirements DC 9V (PS-PS5 AC

adapter)

AA batteries x 4

(NiMH or alkaline)

Power consumption 4 W (PS-PS5 AC

adapter)

Dimensions (w x d x h)

including feet

232 x 138 x 40

(mm) / 9.1 x 5.4 x

1.6 (in)

Weight (excluding

batteries)

620g / 1 lb, 6 oz.

CD playback characteristics

Frequency response 20 Hz to 20 kHz

±1.0 dB

Dynamic range > 88 dB

S/N ratio > 88 dB

THD < 0.01%

Digital signal processing

32-bit

 Spe ciﬁcations and the appeara nce

of the CD-BT1MKII may ch ange

without notice for improvement

reasons.

 e illustrations in th is manual

may diﬀer slightly from the a ctual

product.

Contents

Main CD-BT1 @# Important Safety Precautions Y E R TASCAM CD-BT1MKII 3 Important Safety Instructions Safety Information Important Safety Instructions CAUTION Table of contents About this Manual: Handling of compact discs About the power supply Operation using batteries Notes on batteries Remaining battery charge level display Length of battery life About the power supply (Continued) Operation using an AC adapter Switching the unit on and off Part names and functions Part names and functions (Continued) 1) DC IN Jack 2) Battery Compartment 3) CD Drive Cover 4) Display Part names and functions (Continued) 14) STOP/MTRO Key [H] 15) PLAY/PAUSE Key [G/J] 16) CUE Key 17) PHONES Jack Making connections Connecting a bass guitar (BASS IN) Adjusting the input level Inputting signals from external devices ( ) Making Connections (Continued) Output to headphones and external devices Adjusting the output level Connecting a footswitch Using the menu system Entering the menu system Using the menu system (Continued) Choosing menu items Changing the setting values Exiting the menu system Playback Using the CD player The CUE key Display Pitch and tempo changes Tempo control VSA Key control Fine tuning Using CD effects Turning CD effects on and off BEE (Bass Enhancement Effect) Mono monitor Split monitor Using built-in effects Components Storing your own effect settings in an effect slot Using built-in effects (Continued) Adjusting the mix Recalling an effect with your settings Equalizer Setting the equalizer Recalling equalizer settings Using the metronome Choosing the metronome tempo Choosing the beats Using the tuner Chromatic mode (CHR): Flat Bass guitar mode (BAS): On-key Changing your preferences for the CD-BT1MKII Mix balance CD playback mode CUE key function key and Facts and gures (specications) Page Page