Tascam D00851300A Part names and functions (Continued)

TASCAM CD-BT1MKII — 11

Part names and functions (Continued)

forward or fast rewind.

 e speed of the search increases

if you continue to hold either of

these keys pressed down.

14) STOP/MTRO Key [H]

Press this key to stop playback. Press-

ing and holding this key down activates

the metronome menu (See Using the

metronome).

15) PLAY/PAUSE Key [G/J]

Use this key to start playing a CD.

While a CD is playing, you can pause

playback by pressing this key. Press

again to resume playing.

16) CUE Key

Use this key to return to the cue point

(the point where playback last started).

Use the Setup menu to choose a mode

that the

CUE

key can perform (See

Changing your preferences).

17) PHONES Jack

Connect your headphones here.

18) LINE OUT Jack

Use this port to connect the CD-

BT1MKII to devices such as speakers

with a built-in ampliﬁer, a stereo sys-

tem AUX input jack, a cassette tape re-

corder, or a CD recorder. You can hear

the results of the eﬀects and key chang-

es through devices connected here.

19) OUTPUT Control

Use this control to adjust the output

level of the

PHONES

jack and the

LINE

OUT

jack. ��is control adjusts the level

of the two jacks together (the two jack

levels cannot be adjusted separately).

20) INPUT Control

Use this control to change the input

level of the

BASS IN

jack.

21) LINE IN Jack

Use this stereo jack to connect exter-

nal devices such as a synthesizer, gui-

tar preampliﬁer, cassette tape recorder,

rack-mount eﬀects unit, etc., to the

CD-BT1MKII. is jack has no level

control, so you must adjust the output

level at the source device.

22) BASS IN Jack

Connect a bass guitar to this jack. Set

the

BASS

switch (see 26) according

to the type of bass guitar you are using,

whether passive or active.

23) FOOT Jack

Connect a standard footswitch to

this jack, such as the recommended

TASCAM RC-30P (sold separately).

You can choose from variety of func-

tions to use with a footswitch. (See

Changing your preferences).

24) POWER Switch

is switch turns the power to the

whole unit on and oﬀ.

25) CD EFF Switch

is switch turns CD eﬀects on and

oﬀ.

26) BASS IN Switch (PASSIVE/

ACTIVE)

You can use both passive and active

bass guitars with CD-BT1MKII. Set

this switch according to whether your

bass guitar is passive or active.