Tascam D00851300A Making Connections (Continued)

TASCAM CD-BT1MKII — 13

Output to headphones and

external devices

 Connect headphones to the

PHONES

jack.

 Use the stere o

LINE OUT

jack to

connect the CD-BT1MKII to

external device s, such as s peak-

ers with a built-in ampliﬁer, AUX

input jacks of a stereo system, c as-

sette tape recorders, or CD record-

ers.

Adjusting the output level

You can adjust the output level of

LINE OUT

and

PHONES

by using the

OUTPUT

control.

NOTE

The levels from both the

LINE OUT

and

PHONES

jacks are controlled together by

the

OUTPUT

control and cannot be adjust-

ed independently.

When you have a recording device connect-

ed to the

LINE OUT

jack, remember that

the

OUTPUT

control affects the recording

level.

Connecting a footswitch

RC-30P

FOOTSWITCH

 Connect a TASCAM RC-30P

(sold separately) to the

FOOT

jack.

You can set the polarity (push-

to-make / push-to-break) of the

footswitch using the

POL

item in

the Setup menu.

CAUTION

To avoid problems with your CD-BT1MKII,

use only a footswitch such as the TASCAM

RC-30P (sold separately) that has a standard

phone (tip and sleeve) plug.

Making Connections (Continued)

Contents

Main CD-BT1 @# Important Safety Precautions Y E R TASCAM CD-BT1MKII 3 Important Safety Instructions Safety Information Important Safety Instructions CAUTION Table of contents About this Manual: Handling of compact discs About the power supply Operation using batteries Notes on batteries Remaining battery charge level display Length of battery life About the power supply (Continued) Operation using an AC adapter Switching the unit on and off Part names and functions Part names and functions (Continued) 1) DC IN Jack 2) Battery Compartment 3) CD Drive Cover 4) Display Part names and functions (Continued) 14) STOP/MTRO Key [H] 15) PLAY/PAUSE Key [G/J] 16) CUE Key 17) PHONES Jack Making connections Connecting a bass guitar (BASS IN) Adjusting the input level Inputting signals from external devices ( ) Making Connections (Continued) Output to headphones and external devices Adjusting the output level Connecting a footswitch Using the menu system Entering the menu system Using the menu system (Continued) Choosing menu items Changing the setting values Exiting the menu system Playback Using the CD player The CUE key Display Pitch and tempo changes Tempo control VSA Key control Fine tuning Using CD effects Turning CD effects on and off BEE (Bass Enhancement Effect) Mono monitor Split monitor Using built-in effects Components Storing your own effect settings in an effect slot Using built-in effects (Continued) Adjusting the mix Recalling an effect with your settings Equalizer Setting the equalizer Recalling equalizer settings Using the metronome Choosing the metronome tempo Choosing the beats Using the tuner Chromatic mode (CHR): Flat Bass guitar mode (BAS): On-key Changing your preferences for the CD-BT1MKII Mix balance CD playback mode CUE key function key and Facts and gures (specications) Page Page