Sanyo DSR - 300 manual Recording Conditions SET, Example 5%, Off, ‹On

4RECORDING CONDITIONS SET

Setting normal recording area overwriting and remaining capacity on the operation display area

Settings can be made to indicate whether overwriting is to be performed (deleting old images) recording is to be stopped when any of the hard disk’s recording areas become full. In the latter case, the remaining capacity is shown as a percentage on the operation display area.

1 Move the cursor to “OVERWRITE” under “NORMAL RECORDING AREA” and press the [ ] button, then press the [ ] or [ ] button to select “OFF”.

“**” from “REMAINING DISK WARNING” changes to “1%”.

[Settings] (‹ indicates default setting.)

Setting	Description
OFF	Recording is stopped when the normal recording
	area becomes full.
‹ON	Overwriting automatically starts from the beginning
	of the normal recording area when it becomes full.

2 Press the [ ] button.

The cursor moves to “OVERWRITE” for the alarm recording area.

zIf this setting is turned “OFF”, the space warning or ALARM FULL indicator will start to flash when the remaining hard-disk capacity reaches the percentage set for “REMAINING DISK WARNING”.

3 Press the [ ] button, then press the [ ] or [ ] button to select “OFF”.

[Settings] (‹ indicates default setting.)

Setting	Description
OFF	Recording is stopped when the alarm recording
	area becomes full.
‹ON	Overwriting automatically starts from the beginning
	of the alarm recording area when it becomes full.

zEach menu setting should be performed for each individual unit.

4 Press the [ ] button to move the cursor to “REMAINING DISK WARNING” and press the [ ] button, then press the [ ] or [ ] button to select a remaining capacity value.

(Example: 5%)

The remaining capacity can be set anywhere between 1% (default) and 10%.

5 Press the [EXIT/OSD] button.

The display returns to the normal screen.

A warning will be displayed in the operation display area when the remaining capacity for any recording area reaches setting value. In addition, the ALARM indicator (for the normal recording area) or the ALARM FULL indicator (for the alarm recording area) will flash at this time.

FULL indicator ALARM FULL indicator

Operation		z	5%	Remaining
display area	10-20-04	ALARM	0000	capacity
	08:30:00	EN	10FPS	display

English 57