Switching between frame and field playback | Sanyo DSR - 300

5NORMAL RECORDING/TIMER RECORDING PLAYBACK

Playback with a channel specified for the camera image

If a multiplexer (sold separately) is connected to this unit and images are recorded from multiple cameras, you can specify the number (or channel) of the camera whose recording is to be played back using the following procedure.

[CHANNEL] button

zRefer to P. 17 for more details on connecting this digital video recorder to a multiplexer and refer to P. 52 for more details on settings for multiplexer connection.

1 Press the [CHANNEL] button while a still image is displayed.

A screen allowing you to select the number of a camera connected to the multiplexer is displayed.

2 Press the [ ] or [ ] button to specify a channel.

(Example: Camera 4)

3 Press the [ ] button.

“” appears in the operation display area and the images from the specified channel are played back.

CH 4
05-10-04	10FPS
20: 10:00 EN	10FPS

zThe specification of a channel for playback will only be possible when a multiplexer capable of decoding the channel information (i.e., channel number) is connected.

zWhen this operation is carried out, only the specified channel is played back. No other channels will be displayed.

zWhen a channel is selected, the multiplexer title information, date information, and/or time information may partially disappear.

Switching between frame and field playback

[SEARCH] button

1 Press the [SEARCH] button while the digital video is playing back frame- recorded images.

Each time you press the button, the screen toggles between frame and field playback.

zSwitching between frame and field playback can only be carried out for frame-recorded images.

zFast-moving images that have been frame recorded may appear shaky during playback.

OPERATION

28

English

Image 29

Sanyo DSR - 300 manual Playback with a channel specified for the camera image, Switching between frame and field playback

Contents

Page Service Precaution Introduction Main featuresAccessories Introduction Symbols used in this manualCopyright Contents Contents Settings Network Control Contents Interface SpecificationsNetwork Settings Specifications Contents Network Operation Before USE Installation conditionsConditions to avoid Hard disk and cooling fan are expendable items Before USE Replacing a Removable HDD ReplacementAssemble and tighten the 4 screws Replace the cover Removal Replacing a Removable HDD Pull the HDD tray out using the handle Front panel Names and Functions of Parts Names and Functions of Parts Rear panel ALL Reset switch Connecting a remote control circuit Installation and ConnectionsConnecting cables to the control and alarm terminals Basic connections Making analog series connections Installation and ConnectionsConnecting a multiplexer If you disconnect the power cable Connecting the power cord Operation display area Preparing for USE Changing the position of the operation display area Preparing for USEBuilt-in hard disk Selecting the recording method When you have made a selection, press the button Setting the LANGUAGE/CLOCKTo change the language Press the Menu button Setting the time Setting the LANGUAGE/CLOCKPress the button Press the or button to select Press the button Normal recording Normal RECORDING/TIMER RecordingTimer recording Alarm recording Alarm and PRE-ALARM RecordingSet alarm recording When alarm input is detected Pre-alarm recording Alarm and PRE-ALARM RecordingSet pre-alarm recording If an alarm is detected Press the PLAY/STOP button PlaybackFast-forward playback/fast-rewind playback Viewing still images Normal RECORDING/TIMER Recording PlaybackFrame advance forward/reverse During playback, press the Still Button Playback with a channel specified for the camera image Switching between frame and field playbackPress the Channel button while a still image is displayed Press the or button to specify a channel Searching for Recorded Images Alarm Search JPTIME/DATE Search JP Archive Area Search JP Check that Alarm Search is selected, and press the button Searching for Recorded Images Alarm SearchDuring playback, press the Alarm button Press the or button to select the image to play back TIME/DATE Search Searching for Recorded Images Alarm Thumbnail SearchPress the or button to select Press the or button to select TIME/DATE Search Press the button to select VIEW, then press the button Searching for Recorded ImagesPress the button and set the date/ time to search Searching for Recorded Images Archive Area Search ‹ALARMMotion Detection Search Press the or button to select the image for playback Motion Sensor Set the motion sensor Press the or button to select Preview Press the button Move the cursor to Exit and press the or buttonPress the or button to select View Press the button „ If not FOUND! is displayed Copying an image to the hard disk’s archive area Saving & Copying Recorded ImagesCopying an image to the hard disk’s archive area JP Copying an image to a CompactFlash card or Microdrive JP Press the Copy button Saving & Copying Recorded ImagesPress Button Press the button, then the or button to select Minutes Press the button Press the or button to select Pictures Insert the CompactFlash cardInsertion method Removal method Move the cursor to Start and press the button Recording area in CompactFlash cardsJpeg images Copying frame-recorded images to a CompactFlash card Loading settings from a CompactFlash card Saving Menu SettingsTo leave the Copy Menu Settings screen, press the button Saving on a CompactFlash card When copying recording area settings Saving Menu Settings Displaying menu screens and setting screens Menu Configuration and OperationsPress the or button to select a menu Moving to a sub-menu from Main Menu 1 or To restore menu setting items to their Menu Configuration and OperationsDefault values Overview of Main Menu 1 sub Overview of Main Menu 2 sub- menus Normal REC Mode SET JP Network SET JP Security Lock SET JP Lets you set passwords Table of recording rate and times „ When recording with an 80-GB hard disk at 100% capacityField recording Frame recording „ When recording with a 160-GB hard disk at 100% capacity Recording time LANGUAGE/CLOCK SET Daylight Saving settingsPress the or button to change the setting Press the or button to move the cursor to ADJUST. Time EXT. Clock SET settingsWhen USE is selected for Daylight Saving LANGUAGE/CLOCK SET Flashes Video Input SET Settings for multiplexer connectionSelect 2. Video Input SET, and press the button Press the or button to select the multiplexer to be used Recording Area SET „ Default hard disk settingsDisplaying the recording area Select 3. Recording Area SET and press the button Changing recording areas Recording Area SETWith Normal Recording Area selected, press the button „ Recording area allocations Setting overwriting for the normal recording area Setting overwrite permissionSetting overwriting for the alarm recording area To finish this process Recording Conditions SET Setting series recordingSelect 4. Recording Conditions SET and press the button ‹OFF Press the button, then press the or button to select OFF Recording Conditions SETExample 5% OFF Setting Auto Delete Select 5. Normal REC Mode SET and press the button Normal REC Mode SETExample on Example Timer setting items Timer SETSelect 6. Timer SET and press the button Start To cancel all set timer reservations Timer SETSelect 6.TIMER SET and press the button Press the or button to change SUN to DLY Set the items in the Week and Start columns Timer reservations spanning more than 24 hoursSet the end Week and Stop time. Switch SET to on Holiday SET After entering the setting, press the buttonSet the month and day in item No Example To set November 17 as a holiday Setting alarm recording Alarm REC Mode SETSelect 8. Alarm REC Mode SET and press the button Change the setting When alarm recording settings have been completed Alarm REC Mode SET Setting the alarm trigger Setting pre-alarm recordingWhen settings have been completed Alarm or Move the cursor to Motion Sensor and press the button Setting the motion sensor Settings Display SET and Video Loss SET setting itemsDISPLAY/VIDEO Loss SET Press the Menu button twice Select RS-232C and press the button Settings for RS-232C and RS-485When RS-232C is selected RS-232C/RS-485 SET When RS-485 is selectedSelect RS-485 and press the button Press Button, then the or Button to set the data speed, Buzzer SET Buzzer SET screen setting items Security Lock SET Password setting exampleSecurity Lock SET screen setting items When you have finished making the setting, press the button Setting passwordsSecurity Lock SET Press the and buttons to select the character to enter Example Setting AB123456 Setting the user passwordPress the and buttons to select ON, then press the button Example a To check the security lock, press any button Setting the security lock Making network connections Network SET Display Making network settingsNetwork SET Press the , , , and buttons to input the password Password settingExample Setting AB123456 to ID1 Press the or button to select ID1 Initializing the hard disk HDD SET Recover Power FAILURE/USED TimeFailure Firmware RS-485 Interface SpecificationsRS-232C Termination settings Setting the RS-485 termination switchConnection Cable types Commands On-screen commands „ Menu 74H Commands for setting the recorderCommands for acquiring information „ /CLEAR 53H Alarm REC Full Timer ST-BY Normal REC FullBit assignments in Status Sense D7H data bytes Byte Normal REC Example Setting group number Commands RS-485 only„ RS-485 RCV CMF FEH Example Group number Return codes Command table Page Manual for Remote Operation By Network Connection Network Control Function Network settingsOperations possible with PC control Saving and playing back sound Click Network Connections Network Control FunctionClick Properties Click OK Preparing for Network Control Enter a password for verification purposesControlling from a PC Launch the PC’s web browser Entering the operation screen Preparing for Network Control When control rights are switched to Messages displayed when connectedWhen control rights are switched to the unit Controlling from the unit Channel and screen selection buttons Setting buttonsPlayback buttons Recording buttons Click the button on the operation panel SettingsMaking menu selection Menu structure Daylight SAVING/EXT. Clock SET MENU-SPECIFIC SettingsClock SET 100 MENU-SPECIFIC SettingsVideo Input SET Multiplexer 101 Recording area resetTotal capacity display Area-specific capacity display Setting the remaining-space warning level Select Overwrite for alarm recording area102 Select Overwrite for normal recording area 103 Normal REC Mode SET „ Overlapping of timer reservation times „ Performing timer recording„ Setting a timer for over 24-hours continuous recording 104 Specify the day to be treated as a holiday 105Holiday SET Using Duration Select a mode using Alarm RecordingSet the duration for alarm recording 106 Set the duration for pre-alarm recording using Duration Select on or OFF using PRE107 Make a selection for REC Rate 108 Click the location where the motion sensor is to be setupDisplay SET Set the motion sensor level 109 Select on or OFF for the alarm buzzerBuzzer SET To sound a buzzer on the PC Changing network-related settings Change the settings as requiredPassword Setting 110 111 Power FAILURE/USED TimeHDD SET Hard disk capacity Recording Images Canceling timer recording112 Stopping normal recording 113 Watching ImagesWatching live images during playback Playing back recorded images 114 Performing operations in play modeWatching Images Specifying the channel camera number Screen display items Adjusting the image and audio115 Set the download time using Duration Settings for downloading live images to a PC116 Set Save to PC to on and then click SET 117 „ To cancel a save operationClick Browse Click Start Search for images using the search mode screen Search Mode118 Basic operation 119 Operations in Search Modes Operations in Search Modes 120Select 3. TIME/DATE Search from the Search menu Click Preview Select 5. Motion Detection Search from the Search menu Setting motion sensor detection conditions121 Copying to the archive area 122Click Button on the operation Panel Copying to Archive Area Downloading to a PC 123Saving Recorded Images Image viewer screen 124 DVR Viewer Installing the DVR Viewer125 Operating environment Opening and closing DVR Viewer 126DVR Viewer Opening files 127Click Open O in the File F menu Toolbar Viewing images 128Main window Thumbnail window TOP 129Prev 11IMAGE Number Printing images 130 Saving images 131Specify the start image and end image to be saved Click Start Copy Specifications Specifications132 Jpeg 133 Dimensions Labor Parts Year ExclusionsWeekdays 830 AM 500 PM Pacific Time