DigiTech C0408 Mute / Handsfree Answer Inhibit, PULSE/TONE Switching, Personal Ringing Tones

System Operation IMI 66-083

MUTE / HANDSFREE ANSWER INHIBIT

To prevent distant party from hearlng while hand- set Is lifted,

•Press MUTE. MNTR (SPKR) light will flutter.

Toresume two-wayconversation,

•Press MUTE. MNTR (SPKR) light will turn off.

TOblock out handsfree answer Ofintercom CalIS,

•Press MUTE. MNTR (SPKR) light will flutter.

To release handsfree answer of Intercom calls,

•Press MUTE MNTR (SPKR) light will turn off.

PULSE/TONE SWITCHING

If the local telephone servlce Is pulse (rotary) but tone generation Is requlred during the call, convert to tone whiledlallng as follows:

•Press # at point in dialing sequence where conversion to tone is required. (System will switch back to pulse dialing when call is ended.)

NOTE: Pulse/Tone SwitChinQ can be programmed into auto dial numbers by pressing #during number storage.

PERSONAL RINGING TONES

A station user can select one of four different ringing				FREQUENCY		WARBLE
tones for use at a station.			TONE	PAIR		RATE
o Press ITCM		+% f.	T O N E 1	666/571	Hz	16Hz
•	Dial 4.		TONE 2	1000/800	Hz	16Hz
	Dial 1, 2,3,	or 4 (selects tones
•			1,2,3, or 4).	666/571	Hz	23	Hz
			TONE 3
			TONE 4	1000/800	Hz	23	Hz

BACKGROUND MUSIC

Music must be supplied by the system before it can be turned on at a telephone. Background music, when supplied, automatically turns off during calls.

To turn music on,

•Press ITCM.

•Dial t 1. MNTR (SPKR) light will turn on.

•Adjust loudness of music with call monitor speaker volume control.

To turn music off,

•Press ITCM.

•Dial # 1. MNTR (SPKR) light will turn off.

5 - 8