DigiTech C0408 Ringer Volume Control, Status Indicators and Tone Sequences, Display Intensity

IMI 66-083 System Operatisn 3

RINGER VOLUME CONTROL

Each station has a ringer volume control. Depending upon the model, the ringer control is located on the front edge, rear edge, or bottom of the telephone. Adjust the control lever to OFF, LOW or HIGH volume as desired.

STATUS INDICATORS AND TONE SEQUENCES

The following pages describe the light and ring patterns associated with system operation.

NOTE: The values shown are typical. They are provided for illustration purposes on/y.

DISPLAY INTENSITY

The intensity (brightness and contrast) of the liquid crystal display readout, included on some digital telephones, can be adjusted to a desired operating level at any time that the telephone is idle and on-hook.

To adjust the display Intensity,

•Press and hold the MUTE button until the desired intensity is achieved.

-.-

5-21