DigiTech C0408 system manual Dial Time, Smda Programming, Answer Time

Press ITCM +k # 7 4 6 + for base level.

I

FEATURE DESCRIPTION	ii&Y CODE AND PROMPTING DISPLAY			REFERENCE RECORD
>lscard Dlglts:When the telephone	1. Dial 75.
		“SMDA PROGRAMMING”
;ystemis installed behind a host system 2. Dial 01 to program
;uchas a PBX or CENTREX, access	costing bands.	“COSTING BANDS	”
ties must be dialed before obtaining ar 3. Dial 4 to program
outside line dial tone. These access	discard digits.	“DISCARD DIGITS	w
:odes should be removed before calls ar
	4. Dial 1 - 6 to select entry 1 - 6. “ENTRY X		”
xsted so that they are costed based on	5. Dial # for no discard digits.			5	I I I I	I I I	I
ust the actual telephone numbers dialed
				§
	-OR-
Jp to six different access codes entries				DEFAULT = NO DISCARD
	Dial up to 6 discard digits
Nith up to eight digits per entry can be					DIGITS	ASSIGNED		I
Drogrammed.	then dial#.	“xxxxxxxx	”

6.Dial ?# and repeat steps 4-5 to program next discard digit entry.

7.Dialt +k for next SMDA feature.

	-OR-
	Dial+ +& +k for configuration mode.
Dial Tlme Llmlt: The amount of time tha	1. Dial 75.	“SMDA PROGRAMMING”		DIAI TIME I IMIT
the system ignores for dialing purposes i:	2. Dial 02 to program dial	time limit.		DEFAULT = 0 SEC.
programmable. Dialing time is notcosted		“DIAL TIME XXX ”
when the time of a call is recorded for	3. Dial time in tenths of a minute (001 - 999.
costing.	or dial 000 to clear).	“XXXX	”

4.Dial +k for next SMDA feature.

5.Dialt * for configuration mode.

Answer Tlme Llmlt: The system can be	1. Dial 75.	“SMDA PROGRAMMING”			ANSWER TIME I IMIT
programmed to wait for a period of time	2. Dial 03 to program answer time		limit.		DEFAULT = 0 SEC.
before beginning call cost recording. Thi!		“ANSWER TIME XXX ”
time will allow for a call to ring and be	3. Dial time in tenths of a minute (001 - 999
answered before being costed.	or dial006 to clear).		“XXX	”
	4. Dial +k for next SMDA feature.
	5. Dial +# ++ for configuration mode.

Press SPKR to end.