DigiTech C0408 system manual Voice MAlL Port, Automatic AlTENDANT Optlon, Stmine, Direct Ring

TAB091

FEATUREBENEFIT

?rppott for ,xecuMall voice processing system

With software release 1 la, the DigiTech digital telephone system supports the use of the ExecuMail voice processing system connected to the system’s station ports through the Comdial ATI-D analog terminal interface. The ATI-D is a muttipurpose QB$QxB& accessory for the digital telephone system. It has dual circuits that allow the ExecuMail to interface to two station ports. Refer to Comdial publication lMl89-037, lnsfallation Instructions For The Analog Terminal interface (AT/-D)for complete details for using the ATI-D to interface between the digital

telephone system and the BxecuMail system. In addition to the required programming task of identifying the ExecuMail station ports as voice mail ports, there are several other programming considerations associated with the ExecuMail operation that the programmer can make whenever their options are wanted.

VOICE MAIL PORT (Required)

The programmer must identify the station ports where the installer has connected the ExecuMail system. Identifying them as voice mail ports enables the digital telephone system to recognize them as such for proper call handling. Use the following programming feature to enable the station port for ExecuMail operation.

NOTE: The digital telephone system automatically disables this feature if an installer replaces the AT/-D with a multiline telephone at the programmed station port.

To program this feature, press ITCM +N # 7 4 6 +I+ then do the following steps:

NOTE: The station that is being used for programming cannot be programmed as a voice mail port.

1.	Dial	63.	“STATION FEATURES”
2.	Dial	32.	“VOICE MAlL PORT *

3.Select station ports to be programmed:

-station 1 1 - 57: Dial 11 - 67.

4.Press SPKR to end.

AUTOMATIC AlTENDANT (Optlon)

With the automatic attendant feature, the ExecuMail system automatically answers any line that is ringing at a voice mail port. As a default, the system automatically enables ringing line preference for any port the programmer identifies as voice mail ports. The programmer must choose a ringing assignment for the lines assigned to the voice mail port before the ExecuMail system can provide the automatic attendant feature.

To program this feature, press ITCM * # 7 4 6 *then do the following steps:

Direct Rlnglng
1. Dial	64.	“STMINE	CONFIG”
2. Dial	1.	“DIRECT	RING *

3.Select line ports for direct ringing:

-lineportl-14=DialOl -140rpressAl -A14,

-line port 15,16 = Dial 1516 or press Bl, 82,

-line port 17 - 24 = Dial 17 - 24 ( or press HOLD then press Al - A8).

4.Dial # when all line ports are selected.

Continued on next page . . .

A