DigiTech C0408 system manual System Clock, System Speed Dial Programming, System Bperation

System Bperation IMI 66-083

SECTION 2

AlTENDANT STATION OPERATION

The attendant station provides additional operating features that are not available from other stations in the system.

SYSTEM CLOCK

The system clock can be programmed to maintain current date and time information . This information is provided to the LCD speakerphone for display.

1.Press ITCM.

2.Dial%#O 1 . .

3 . Dial two digits (00-99) for yr.

4.Dial two digits (01-12) for mo.

5.Dial two digits (01-31) for day.

6.Dial two digits (00-23) for hr.

7.Dial two digits (00-59) for min.

8.Press MNTR (SPKR) to end.

SYSTEM SPEED DIAL PROGRAMMING

A special system-wide list of numbers can be programmed for automatic dialing by all users.

1.Press ITCM

2.Dial +i+ # 0 2.

3 . Dial 01 - 99 to chose storage location.

.4. Dial #to clear current entry.

5 . Choose line to be used:

•Dial 90 for no line assignment (system will choose last line used at calling station or prime line if one is assigned to calling station).

•Press buttons Al - Al4 for lines 1-14 or dial 01 - 14.

•Press buttons Bl , B2 for lines 15,16 or dial 15, 16.

•Press HOLD then press buttons Al - A8 for lines 17 - 24 or dial 17 - 24.

•Dial 91 - 94 for line groups 1 - 4.

•Press ITCM for intercom line.

6 . Dial the number to be stored (32 digits maximum).

•Press HOLD to store pause (if required).

•Press TAP to store flash (if required).

7. Press TRANSEONF to save number.

8 . Repeat steps 3 - 7 to store next number.

9.Press MNTR (SPKR) to end.

NIGHT TRANSFER (of ringing)

The day, or normal, ringing assignments of incoming lines can be transferred to a particular station or stations (these line/station ringing assignments are chosen through class of service programming) for off-hour or special-purpose answering. Additionally, stations can be arranged through class of service programming, to be able to answer any ringing outside line. This line answer from any station action. is also enabled with the night transfer (of ringing).

1.Press ITCM.

2.Dial +l+ # 0 3.

3.Press Al (top, left-hand programmable button) to toggle feature on or off. Associated light will turn on when night transfer is active and turn off when it

is inactive.

O R

•Dial 1 to enable (Al LED turns on).

•Dial 2 to disable (Al LED turns off).

4.Press MNTR (SPKR) to end.

NOTE: When this feature is on, the ITCM light will flash.

5 - 14