DigiTech C0408 Default = 0 Rings, Disd Assist DAY STA Mght STA UMS AS 1 GM2, Disd Assist Nite

Yf

Press ITCM % # 7 4 6 t for base level.

‘EATURE DESCRIPTION	ENTRY CODE AND PROMPTING DISPLAY	REFERENCE		RECORD
1ISD Incoming Ring - Continued	- Dial # then assign line pork to ring number.		DISD	INCOMING RINGS
		011	1213/415(6171819
	Line port 1 - 14 = Dial 01 -14 or Press Al - Al4
		DEFAULT = 0 RINGS
	Line port 15,16 = Dial 15, I6 or Press BI, 82
	Line port17-24=DialI7-24
	-OR-
	Press HOLD then press AI - A8

4.Press +k and repeat steps 2 and 3 for further DISD ring assignment.

-OR-

Press % % for configuration mode.

1ISD Assist Statlon: When extension	1. Dial 46.	“DISD ASSIST ”	DAY STA	MGHT STA	UMS AS 1 GM2
lumber dialing is not completed within	2. Choose operating mode to be programmed:
,he programmed dial time limit, the call	- Dial I or press AI =
			DEFAULT = STA IO DAY AND NIGHT
s routed to the DISD assist station.	normal mode.	“DISD ASSIST DAY X n
	-OR-
	- Dial ‘2 or press A2 = night transfer
	(of ringing) mode.	“DISD ASSIST NITE”

3.Select assist station.

-Dial 08 for no station (line drops after timeout).

-OR-

-Dial IO - 67 to select DISD assist station. (LED On = lines assigned to assist station).

-Dial # then assign line pork to assist station. Line port 1 - 14 = Dial 01 -14 or Press Al - Al4

Line port 15, 16 = Dial 15, I6 or Press Bl, B2

Line port 17 - 24 = Dial 17 - 24

-OR-

Press HOLD then press AI - A8

4. Press % and repeat steps 2 and 3 for further assist station programming.

-OR-

Press * * for configuration mode.

I1

1Press SPKR to end.]