DigiTech C0408 Press Itcm % # 7 4 6 + for base level, Jne Group Queue Button a station, Recount

Press ITCM % # 7 4 6 + for base level.

FEATURE DESCRIPTION		ENTRY CODE AND PROMPTING DISPLAY							REFERENCE RECORD
Jne Group Queue Button: A station
		1.	Dial 66.				“BUTTON MAPPING	”	SEE CHART ON PAGE 4-49	I
Jser can queue for a busy line by		2.	Dial 15.				“ASSIGN LINE GRP Q”
jressing	a button that is programmed as	3.	Select button to be programmed:
he line group queue button.			-PressAl - A14, Bl - 86.
		4.	Select station ports to be programmed
			with QUEUE				button:
			- Station 10				- 57: Dial 10 - 57.
		5.	Dial 5		for next line group queue
			button		assignment.
			-OR-
			Dial +k +k for next button mapping feature
			-OR-
			Dial * +k +k for configuration mode..
Recount	Code Button: Press the
		1.	Dial 66.				“BUmON MAPPING”		SEE CHART ON PAGE 4-49	I
amount	code button and then dial an	2.	Dial 17.				“ASSIGN ACCT KEY	”
account	code to record a call into a	3.	Select button to be programmed:
particular	catagory without interrupting		- Press Al - A14, Bl - B6
the call.		4.	Select station ports to be programmed:
			- Station 10			-	57: Dial 10 - 57.
		5.	Dial +		for	further ACCOUNT CODE
			button		assignment.
				al-
			Dial ++ +k for next button mapping feature.
				-OR-
			Dial % % % for next configuration mode.

I Press SPKR to end. I