DigiTech C0408 system manual Press Itcm ++ # 7 4 6* for base level

Press ITCM ++ # 7 4 6* for base level.

1 I

f 8

!one Call Band Tables (Long Disfancx MIS): Calls that do not match exception ables are measured for the number of jigits dialed. Those calls with numbers hat have 10 digits or more (long distanct :alls) are compared to entries in four different zone call band tables. Program he cost values for zone call band tables n call rate tables 25 - 28.

Area Code Band Table (Long Distance Calls): Long distance calls that do not match entries in zone call band tables an matched against seven different area code band tables. Program the cost values for area code band tables in call rate tables 11 - 17.

1.	Dial	75.			“SMDA	PROGRAMMING”
2.	Dial	01 to program
	costing		bands.		“COSTING BANDS		*
3.	Dial	3	to	program
	zone	call		bands.		“ZONE BANDS	”
4.	Dial 0 if no zone is
	to be		as’gned.			“NOZONE	n
	-OR-
	Dial 1 - 4 for zones 1				- 4.	“ZONEX	”

5.Dial 200 - 999 to assign an area code.

6.Dial #.

7.Dial 268 - 999 to as’gn an office code.

8.Dial # and repeat step 7 for another office code.

9.Dial % and repeat steps 3-9 to add another area code to same zone or to program next zone.

10.Dial t f for next SMDA feature. -OR-

Dial * 5 +k for configuration mode.

1.	Dial	75.		“SMDA	PROGRAMMING”
2. Dial 61 to program
	costing		bands.	“COSTING BANDS			n
3.	Dial	2 to	program
	area	code	bands.	“AREA CODE		BANDS”
4.	Dial 0 if no band is				“NO BAND		”
	to be as’gned.
	-OR-
	Dial	1 - 7 for bands 1		- 7.	“BAND	X	”
6.	Dial	286	- 999 to as’gn area code.
5.	Dial	# and repeat step 8 for additional code.

8.Dial ?% and repeat steps 3-6 to program next band

7.Dial +k t for next SMDA feature.

8-OR-

Dial + t +k for configuration mode.

BAND	AREA	OFFICE
	CODE	CODE
2
]	I	I
3
4
IEFAULT = NONE AS’GND

3AND 1 AREA CODF PREFIXLES)
I	1

)		I
	I	I
.		I
	?
	I

IEFAULT = NONE AS’GND

I(

1/ Press SPKR toend.