DigiTech C0408 system manual Benefits, Account Codes Support for Caller ID Service

DigiTech System Software Enhancements TAB 099

FEATURE

Account

Codes (cont.)

Support for Caller ID Service

BENEFITS

To display a list of stored emergency numbers,

•Enter 1 7 (if there are no emergency numbers already stored, the system will respond “Table is Empty”)

To return to the previous menu during programming,

•Enter 1 8

To print out all information pertaining to account code programming,

•Enter COS programming

•Enter 1 for System COS

9 Enter 6 for COS Data Printout

•Enter 7 for Toll Restriction Data Printout; the system will print the status of the following parameters:

Verified/Non-Verified

Account Code Length

Verified Account Code Length

Account Code Display Duration

Account Code Display for Incoming -- Enable/Disable

Account Code Display for Outgoing -- Enable/Disable

Emergency Numbers

Valid Account Codes

•Enter 5 for All Station COS Data Printout; the system will print the status of “Forced Account Code at Station”

Note: If Account Code Length is greater than eight d@its, SMDA reports by station and by account will print in a two-line format. Also, SMDR and SMDA reports will include the Caller ID number in the number field for incoming calls. The Caller ID number will be .preceded by a slash to distinguish it from outgoing digits.

GENERAL INFORMATION
Caller ID data is sent from the Central Off ice along lines assigned to the Caller ID service.	Caller

ID information is displayed at a station only if the station is assigned to the Caller ID service, and then only for Caller ID lines at that station which:

•ring audibly

•are answered by pressing the ringing line

. are transferred to the station

Caller ID data for a call is received at a station between the first and second rings. Through programming, you can enable the first ring for a line assigned to Caller ID to be either audible or silent. Selecting the “silent” option insures that the Caller ID data is displayed prior to ringing, which nearly eliminates the loss of Caller ID data due to premature answering.

AUTOMATICALLY DIALING CALLER ID NUMBERS

Station users may automatically retrieve and dial the last Caller ID number displayed at a station by using a preprogrammed SAVE recovery button. Because you can store the local area code and up to 100 local office codes, ten-digit Caller ID numbers can automatically be transformed

into a dialable format (seven-, eight-, and eleven-digit Caller ID numbers are already dialable and do not need to be transformed).