DigiTech C0408 system manual Feature, Support for ExecuMall voice processing system, Benefit

FEATURE

Support for ExecuMall voice processing system - continued

TAB091

BENEFIT

5.Select station ports to be programmed: station 1 l- 57 = dial 11 - 57.

6.Dial +% when all station ports are selected.

7.Dial +k t for next station/line ringing assignment or press SPKR to end.

Delayed Rlnglng

1.	Dial 54.	“STA/LINE	CONFIG.”
2.	Dial 2.	“DELAY	RING -

3.Select line ports for delayed ringing:

-line port l-14 = Dial 01 - 14 or press Al - A14,

-line port 1516 = Dial 1516 or press Bl, B2.,

-line port 17 - 24 = Dial 17 - 24 (or press HOLD then press Al - A8).

4.Dial # when all line ports are selected.

5.Select station ports to be programmed:

-station 1 l- 57: Dial 11 - 57.

6.Dial ++G when all station ports are selected.

7.Dial +k ++G for next station/line ringing feature

or press SPKR to end.

Night Transfer (of ringlng~

1.	Dial	54.	“STAILINE CONFIG”
2.	Dial	3.	“NIGHT RING”

3.Select line ports:

-line port l-14 = Dial 01 - 14 or press Al - A14,

-line port 15,16 = Dial 1516 or press Bl, 82,

-line port 17 - 24 = Dial 17 - 24 (or press HOLD then press Al - A8).

4.Dial # when all line ports are selected.

5.Select station ports to be programmed:

-station 11 - 57: Dial 11 - 57.

6.Dial + when all station ports are selected.

7.Dial ++ +k for next station/line ringing feature

or press SPKR to end.

AUTOMATIC TRANSFER OF VOICE MAIL (Option)

The programmer can choose the immediate transfer mode for voice mail transfers. However, if he turns on the screen and/or confirm options provided by the ExecuMail system, he must not choose the immediate transfer mode because it allows the system to transfer a call as soon as it answers it precluding any screen and confirm action that the ExecuMail can provide.

To program this feature, press ITCM * # 7 4 6 +k then do the following steps:

1. Dial 25 “V MAIL AUTO XFER”

2.Press Al to toggle between enable and disable (LED On = Enable) or dial 1 to,enable (Al LED on) and dial 2 to disable.

3.Press SPKR to end.

Continued on next page . . .

5