DigiTech C0408 system manual Recall/Flash, Paging

MI66-083 System Operation .,

RECALL/FLASH

FLASH

PBX, CENTREX and custom calling services may require this feature.

If a system has been conflgured for flash,

•Press TAP to generate a timed flash signal.

RECALL

This feature provides disconnect and dial tone recall.

If a system has been configured for recall,

•Press TAP to disconnect current call and receive a new dial tone for another call.

NOTE: A system can be configured for either flash or recall but not for both.

PAGING

EXTERNAL PAGING

Requires external paging unit.

•Ltft handset.

•Press ITCM then dial 89. -OR-

•Press programmable button programmed for paging access.

•Make paging announcement and hang up.

•Dial zone number - (84,85,86, or 87 for all-call).

•Make announcement.

•Hang up handset or wait on line for an answer.

MEET-ME PAGE (Answerback of Page)

To answer all-call or zone page from any telephone,

•Lii handset.

ALL-CALL AND ZONE PAGING	• Press ITCM.
To paw,	• Dial 88.
• Lii handset.	0 Meet paging party on line for private conversation.
• Press ITCM.
	DO NOT DISTURB

Toactivate (silence statlon rlnger and appear busy to Intercom calls),

•Press programmable button pre-programmed for this purpose. (Associated light will turn on).

NOTE: The calling party will hear two quick tone bursts every 1.5 seconds. The feature cannot be overridden by the calling party.

Through class of servlce programmlng, a statlon can be allowed to override a do not disturb (DND) condltlon atanotherstatlon.

If DND overrlde Is allowed,

•Make intercom call and hear busy signal.

•Dial G+ 09. An intercom call rings at the called station.

To cancel,

•Press programmable button again. (Associated light will turn off .)