DigiTech C0408 system manual Press Itcm ‘Ik # 7 4 6 * for base level, Deptx Yyyy

Press ITCM ‘Ik # 7 4 6 * for base level.

STATION MFSSACF I’IFTAII AC?COl INTING RFPORTING

-. -. .-.. ,..---CI-- II....- .x----.. . ..w- . --. -. -. I. --

Five different call cost reports can be produced by the system for printing. They are:

1.Detailed report of all station

2.Detailed report of all accounts

3.Trunk summary report

4.Department summaryreporl

5.All records

Reports are generated automatically for printing whenever the system detects that the records storage area is ninety-five percent full. The reports to be printed are chosen by programming action and are printed in the order of selection. The system can be programmed for these reports to be

generated automatically for printing at a certain time each day. Programming action can also be taken so that all printed records are then deleted except for those collected during the printing operation. These are stored for later printing.

f a

that SMDA call cost reports can be produced on a department by departmen basis.-.

NOTE: Each station in the system can be assigned to a department for call costing purposes a/though no assignment is required.

Refer to the procedure given on

“SMDA PROGRAMMING”

al 04 to define department numbers.

“SMDA DEPARTMENTS”

3. Dial 1 - 6 for dept. 18. “DEPTX -

4.Dial 0000- 9999 for department number.

“DEPTX YYYY ”

5.Dial + for next department, and repeat steps

3 - 7 until all departments are numbered.

6.Dial+ % for next SMDA feature.

7.Dial+N +Ic+Ic for configuration mode.