DigiTech C0408 system manual Base Unit Product Code, Feature and Benefit, Smda Reporting

COMDWL

Made m in the USA

PK021-001 to

TECHNICAL ADVISORY BULLETIN

Date: January 1993 issue: TAB 099

SOFTWARE ENHANCEMENTS FOR

THE DigiTech DIGITAL TELEPHONE SYSTEM

This bulletin discusses the following software enhancements and feature additions to the DigiTech telephone system:

• Enhanced SMDA reporting

• Expanded options for account code entry • Support for Caller ID service

Availability of these enhancements is as follows:
BASE UNIT PRODUCT CODE	SOFTWARE CARTRIDGE PRODUCT CODE
GO408 All Revisions	SO408 Rev. 13a and later
GO81 6 All Revisions	SO816 Rev. 13a and later
Gl632 All Revisions	S1632 Rev. 13a and later

Note: Due to the addition of a new account code table, m follow these steps when updW software In the field.* .

1. Save current database

2.Install new software

3. Master clear system

4.Restore database

5. Perform additional programming, if desired

FEATURE AND BENEFIT

This section describes the major features and benefits of this software enhancement, including programming information.

FEATURE

SMDA Reporting

Through VDT

Programmlng and

Per-Station SMDA

BENEFIT

A menu selection has been added so that SMDA reports can now be requested from VDT programming and can be sent to either port A or port B. This feature can be used remotely to capture SMDA reports; as well, SMDA station reports can now be requested per station. Note, however, that only one station report can be requested at a time. The Class of Service programming requirements for SMDA reporting are as follows:

STATION 10 PROGR-

1.Press ITCM + # 7 4 6 +k to enter COS programming 2 . Dial 07 for SMDA reports

3.Dial 1 for station reports

4 . Dial station number and then press #, or press # for all stations