DigiTech C0408 system manual Ount Des, T C O S P R O

, TAB 099 DigiTech System Software Enhancements

FEATURE

- :ount

_ /des (cont.)

BENEFITS

V D T C O S P R O -

To disable account codes,

•Enter7

To enable account code display for incoming calls,

•Enter8

To disable account code display for incoming calls,

•Enter9

To enable account codes display for outgoing calls,

•Enter 1 0

To disable account code display for outgoing calls,

. Enter 1 1

To set the account code message display time,

. Enter 1 2

. Type in display time (l-20 seconds)

To set the maximum account code length,

. Enter 1 3

•Type in account code length (3 - 16 digits) -- this number must be greater than or equal to the number of digits to verify

To set the number of accounf code digits to verify,

•Enter 1 4

•Enter Y to prompt “Change Deletes All Verify Account Codes” “Are you sure you want to do this (Y/N) ?,,

. Enter account code length to verify (3 - 16 digits) -- this number must be less than or equal to maximum account code length

To set emergency numbers (which will not require account codes for dialing),

•Enter 1 5 (If there are already three emergency numbers stored, system will respond “Table is Full,” in which case you will need to clear emergency numbers before entering a new number -- see below)

•Type in the emergency number (1 - 12 digits)

To clear previously stored emergency numbers,

•Enter 1 6 (If there are no emergency numbers already stored, system will respond “Table is Empty”)

9 Type in the emergency number to be cleared (1 - 12 digits)

7