DigiTech C0408 Direct Inward Station Dialing Disd, Base Level The first step in any, Dlal Tlme

DIRECT INWARD STATION DIALING (DISD)

he DISD feature allows an external party to call an intercom station directly without assistance by the attendant. The DISD call must be received n a line which has been specially programmed to allow this feature. Any line can be programmed to be a DISD line for both the normal mode of peration and the night transfer (of ringing) mode of operation.

he number of rings which occurs on a DISD line before it is answered is programmable. By setting a large number of rings, time is allowed for a all to be serviced in a regular manner by stations that have a line appearance for the DISD line. Setting the number of rings to 0 disables the line )r DlSD’u’se. If a line is to be dedicated for DISD use, it is a good practice to set it for one ring. The amount of time allowed for an extension umber to be dialed is programmable as is the DISD assist station that will answer calls that are not completed during this dial time limit.

is recommended that a music source be connected to the system to provide a reassurance to the caller during a camp-on situation when the rlSD feature is being used.

FEATURE	DESCRIPTION	ENTRY CODE AND PROMPTING DISPLAY			REFERENCE RECORD
Base Level: The first step in any		Press ITCM Dial % # 7 4 6 f
jrogramming sequence is to enter the
)ase level. Once in this mode, any
desired configuration can be set.
Dlal Tlme	Llmlt: When extension	1. Dial 44.	“DISD DIAL TIME X n		DlAl	T I M E		T (SFC!
number dialing is not completed within		2. Press program button to select dial time limit:			61	9		12 I 15
the programmed dial time limit, a DISD		- Dial 1 or press Al = 6 sec.			DEFAULT q 12		SEC
zall is routed to the assist station if one		- Dial 2 or press A2 = 9 sec.
is programmed; otherwise, the line is		- Dial 3 or press A3 = 12 sec.
dropped.		- Dial 4 or press A4 = 15 sec.
		3. Press +N for configuration mode.
DISD lncomlng Rings: The number of		1. Dial 45.	“DISD RINGS	”
rings which occurs on a DISD line		2. Press program button to choose operating mode
before it is answered is programmable.		- Dial 1 or press Al
Setting a large number of rings allows		= normal mode.	“DISD RINGS DAY X	”
time for a call to be serviced in a		-OR-
regular manner by stations that have		- Dial 2 or press A2 = night transfer
line appearance for the DISD line if		(of ringing) mode.	‘DISD RNGS NITE x”
such action is desired.		3. Select rings to occur before line is answered.

-Dial 0 for no rings. This disables DISD for line. -0%

-Dial 1 - 9 = rings 1 - 9

(LED On = lines assigned to number of rings).

Continued

-.