DigiTech C0408 system manual Featurebenefit

TAB09 1

FEATUREBENEFIT

Support for DiglTech telephones wlth a revision letter of I or later - continued

Support for single-line proprietary telephones

There are several items that the installer/programmer needs to consider when installing the revision I and later DigiTech telephone to a DigiTech system. These items are detailed below.

ti While the DigiTech system with software release 11 a and later supports the use of all DigiTech telephones regardless of their revision letter, any systems with a software release of 9 or earlier will not support the revision I and later telephones. In other words, whenvever a system includes revision I or later telephones, be sure that the system software release is 11 a or later.

ti Always program station ports to provide ringing line preference to revision I and later telephones that are connected there. This action is necessary before the orange LED feature can become active.

(/ The auxiliary jack will only serve the external device listed in the telephone display and will only serve one of those devices at a time. The user must program a separate enable/disable button for each external device that he or she plans to connect to the auxiliary jack. The installer must provide external power for the auxiliary device if it requires power. The telephone does not supply any power to the device through the auxiliary jack. The auxiliary jack is an source of audio output from the telephone and is not designed to receive signals or power from an external device or a telephone line. Do not connect the output of an external device or the tip and ring leads of a telephone line to the auxiliary jack. Do not connect any devices other than those mentioned in the telephone users guide to the auxiliary jack.

With this software release, the DigiTech digital telephone system provides support for the Comdial proprietary single-line digital telephone (product code 7701X-**). The system automatically recognizes the 7701 X-” telephone when the installer connects it to a station port. This means that the system programmer does not have to take any special programming steps to allow the 7701X-** telephone to operate. He or she can use any of the station programming described in the system manual provided with the telephone system to adjust the parameters of the station port as they are needed. Publication GCA70-232, Proprietary Single-Line Telephone User’s Guide provides complete instructions for using the 7701 X-‘* telephone