DigiTech C0408 system manual Access Code, Assign EXT. NUM, DEPT. Calling, Deptx WYY, Dept X YYW ZZ

Ef

Press ITCM ++ # 7 4 6 t for base level.

		ENTRY CODE AND PROMPTING DISPLAY							iEFERENCE RECORD
FEATURE DESCRIPTION
Flexlble Station Numberlng: The		1.	Dial 52.			“ACCESS CODE		”
;ystem	supports a flexible station	2.	Dial 1 to assign Ext no.			“ASSIGN EXT. NUM.”
numbering plan for calling individual		3.	Select	station	number:	“EXT .	xxxx	”
stations and departments. Each station		-Station		lo-57= Dial10-57
:an be	programmed to respond to the	4.	Dial new ext. number.			“HT. xxxx	YYW	VI
dialing of any available number between			NO773 Extension number can be max. of four digits.
10 and 7999; however, the same dialing
				If fess than four digits, leading zeros must be
zode cannot be assigned as both a
				tiaied	before number.
station extension number and a
				Example: For ext no. IS, dial 0015).
department access code, nor will the
		5.	Select next station number and assign ext. no.
system allow an extension number or
			-OR-
access code conflict such as 15 and
			Dial t for configuration mode.
1500 to	be assigned.

					“ACCESS CODE	”
Direct Department		Calling (Access	1. Dial 52.				DFPARTMENT ACCESS CODF
Codes): Department access codes can			2. Dial 2 to assign access		codes to depts.		11	71	31	41
							DEFAULT q		NOT AS’GND
be programmed to be any number					“DEPT. CALLING ”
between 10 and 7999; however, the			3. Dial 1 - 4 for dept. 1	- 4.	“DEPTX WYY	”
same dialing code cannot be assigned			4. Dial new access code.		“DEPT X YYW ZZ
as both a station extension number and			NO773 New code can be	max. of four digits.
a department access code nor will the
			If less than four digits, lea&g zeros must
system allow an extension number
			be daled before number. Code cannot
conflict such as 15 and 1500 to be
			conflict with station extension numbers.
assigned. Further, with system defaultet
			5. Dial next department number and program
extension	numbers,	assigned
			access code.
department access codes must start at
			-OR-
0058 or	larger.
			Dial f for next access code feature.
NOTE: See page 4- 18 for line			-OR-
assignment		and page	Dial * + for configuration mode.
4-3 1 for station assignment
									I
										Press SPKR to end.