DigiTech C0408 system manual Press Itcm * # 7 4 6 % for base level

Press ITCM * # 7 4 6 % for base level.

I

FEATURE DESCRIPTION

Call Costing Tables (Local And Long Distance Calls): Local calls and long

distance calls that do not match entries ir any exception table, office code band table, zone call band table or area code aand table are matched against entries ir :a! rate tables 2 - 10 and 29 - 33 and zoosted accordingly. Call rate tables are also used to cost calls that are matched i the office code band tables, zone call band tables, area code band tables, and any calls that require special or extracrrdinary rates. If a matching call rate table can not be found, calls are costed by call rate table 1 (the table of last resort for costing all calls).

Offloe code band tables = call rate tables 18 - 25 Zone call band tables = call rate tables 25 - 28 Area coda band table = 1’1 - 17

NOTE : Dialing a 00 or a 000 as an entry in steps 7, 9, II, and 13 will clear the current entry for those steps.

ENTRY CODE AND PROMPTING DISPLAY

1.	Dial	76.		“CALL COST TBL	”
2.	Dial	table	number (01 -	33).
		1 to		“CALL COST TBL XX”
3.	Dial		enter matching	digits.
				“xxxxxxxx	”

NOTE: Cal Cost Table 1 wil/ not accept matching digits.

4.Dial #to clear previous digits.

5.Dial matching digits for costed number (32 max.

# = match anything digit). “XXXXXXXX ”

6.Dial +k to end matching digits.

7.Dial 2 then dial 01 - 99 for Tier 1 time in

tenths of minutes. “TIER 1 T/ME XX ”

8.Dial +k.

9.Dial 3 then dial 001 - 999 for Tier 1 rate in cents.

“TIER 1 RATE XXX ”

10.Dial +k

11.Dial 4 then dial 001 - 999 for Tier 2 rate in cents.

“TIER 2 RATE XXX ”

12.Dial +.

13.Dial 5 then dial 001 - 999 for surcharge rate in

cents. “SURCHARGE XXX ”

14.Dial +k C to program next call cost table and repeat steps 2-14 until all tables are entered.

15.Dial * ++ % for configuration mode.

REFERENCE RECORD

CALL COSTING RECORDING TABLES SHOWN ON NEXT PAGES

EXAMPLE TABLE:

Press SPKR to end.

I