DigiTech C0408 Service Observing, Executive Override, Account Code Operation, Outgoing Call

System’Operation IMI 66-083

SERVICE OBSERVING

A station can be programmed by system class of service to allow the user to monitor a conversation at another station in an un-announcedand muted manner.

•Press ITCM.

•Dial # 03.

. Dial extension number of station to be monitored.

•Monitor the in-progress call.

To end observation,

•Press MNTR (SPKR).

EXECUTIVE OVERRIDE

A station can be programmed by system class of service to allow the user to break into a conversation at another station.

•Make an intercom call, and hear busy signal.

. Dial + 03. A warning tone will sound at the called station.

. Join in-progress call.

ACCOUNT CODE OPERATION

Account codes are assigned by SMDA class of service programming and are used by the system to identify calls by category, or special grouping, for SMDA call reporting purposes. Enter an account code while on line either before an outgoing call is dialed, after the distant party has hung up, or during a call. Account code entry is voluntary. If it is not entered, an outgoing call will still go through or an incoming one can still be completed. To enter an account code, first either dial the entry code or press an ACCOUNT CODE button (if one is assigned by class of service programming). After doing this, dial the account code number.

OUTGOING CALL

WITHOUT ACCOUNT CODE BUTTON

Select line. Display on LCD speakerphone will prompt for account code entry if feature is active.

Press ITCM * 0 4. Line is automatically placed on hold.

Dial account code. Listen for dial tone. If error tone sounds or error message shows on LCD, check account code for validly and re-enter correct code.

Dial number to be called.

WITH ACCOUNT CODE BUlTON

•Select line. Display on LCD speakerphone will prompt for account code entry if feature is active.

•Press ACCOUNT CODE button. Associated LED

will flash while system awaits account code entry. It

will turn off when account code is entered. It will also turn off after 10 seconds with no account code entry or if button is pressed a second time (to void entry requirement).

Dial account code number. If error tone sounds or error message shows on LCD, check account code for validly and re-enter correct code.

Dial number to be called.

INCOMING CALL

WITHOUT ACCOUNT CODE Bull-ON

•Answer call.

•Press ITCM +# 0 4. Incoming call is automatically placed on hold.

•Dial account code. lf error tone sounds or error message shows on LCD, check account code for validity and re-enter correct code.

•Press line button to return to call.

WlTH ACCOUNT CODE BUTTON

•Answer call.

•Press ACCOUNT CODE button and dial account code number anytime during call. If error tone sounds or error message shows on LCD, check account code for validity and re-enter correct code.

NOTE: The ACCOUNT CODE button will on/y work when account codes have been programmed by SMDA class of service programming.