DigiTech C0408 Press Itcm +k # 7 4 6 ++ for base level, ‘EATURE Description, Origination Deny

f

E

Press ITCM +k # 7 4 6 ++ for base level.

‘EATURE DESCRIPTION	ENTRY CODE AND PROMPTING DISPLAY					IREFERENCE RECORD
Zall Orlglnatlon Denled: The ability to	1.	Dial 54.	“STMINE CONFIG.”				MARK STATION/LINE RECORD ON PAGE 4-40
rrfginate calls on certain lines can be	2.	Dial 6.	“ORIGINATION DENY”				DEFAULT = NO ORIG. RESTRICTIONS
denied to individual stations. The ability	3.	Select line ports:
o answer incoming calls on these lines		- Line port l-14 = Dial	01 - 14	or press Al -	Al4
s still allowed.		- Line port 15, 16 = Dial 15, 16		or press 81,	B2.

-Line port 17 - 24 = Dial 17 - 24 -OR-

Press HOLD then press Al - A8

4.Dial # when all line ports are selected.

5.Select station ports to be programmed:

-Station 10 - 57: Dial 10 - 57.

6.Dial t when all station ports are selected. -OR-

					Dial ?# + for next station/line feature.
					-OR-
					Dial % 5 % for configuration mode.
Idle Llne Preference: With idle line				1.	Dial 64.		“STALINE CONFIG.”		MARK STATION/LINE RECORD ON PAGE 4-40
sreference enabled, taking			a station	2.	Dial 7.		“/DL	E L/NE pR/=F. ”	DEFAULT = NONE ASSIGNED
)ff-hook		will automatically connect it to		3.	Select	line	ports:
any	assigned and idle line		programmed		- Line	port	l-14 = Dial 01 - 14	or press Al - Al4
‘or	this	purpose.			- Line port 15,16 = Dial 15,16 or press Bl, 82.
					-Lineportl7-24=Dial17-24
							-OR-
							Press HOLD then press Al - A8

4.Dial # when all line ports are selected.

5.Select station ports to be programmed:

-Station 10 - 57: Dial 10 - 57.

6.Dial +% when all station ports are selected.

-OR-

Dial % % for next station/line feature.

-OR-

Dial +% % % for configuration mode.

1Press SPKR to t?YIJ