Voice Announce Blocking, Line Monitoring

System Operation

IMI 66-083

To receive message at an alerted station,

9 Observe flashing MW light.

•Lit handset.

•Press ITCM HOLD.

•Connection to message desk is automatic.

LCD MESSAGING

System supplied messages can be set at a station to be displayed by a calling LCD speakerphone

To turn on message,

•Press ITCM.

•Dial % 02

•Dial message code number (1 - 0). See attendant for list of messages available.

•Press MNTR (SPKR). Intercom light flashes.

The default messages of “BACK AT” and “CALL” may be provided for use:

If “BACK AT” is provided as message 1, then dial time in twelve-hour format after dialing message access code 1.

If “CALL” is provided as message 2, then dial extension that calls are forwarded to after dialing message access code 2.

To turn off message,

•Press ITCM.

•Dial # 02.

To send message for assistance while idle or on a call,

•Press ASSIST button.

•If extension number of assisting station is not programmed, press DSS button for it. If assisting station is idle, tone burst sounds and message appears on display. If it is busy, message appears when it becomes idle.

STATION-TO-STATION MESSAGING

If a station has BLF appearance at another station, a call-back message indication can be left at that station.

To activate messaging,

•Make intercom call and hear ring-back tone.

•Dial % 7. BLF light at called station flutters.

To cancel messaging,

•Press ITCM. • Dial # 7.

•Dial extension number of station at which message call-back indication was left.

To answer messaging,

•Press DSS button associated with lighted BLF light.