DigiTech C0408 Pr Y Itcm % # 7 4 6 ++ for base level, Eature Description, Lnes To Buttons

l-Pr Y ITCM % # 7 4 6 ++ for base level.

:EATURE DESCRIPTION		ENTRY CODE AND PROMPTING DISPLAY							REFERENCE RECORD
.lnes To Buttons - continued
		6.		Dial	# to	finish button mapping.			1 SEE CHART ON PAGE 4-49	I
		7.		Select station port to be programmed:
			- Station 10 - 57: Dial 10 - 57.
		8.		Dial	5 for further line/button assignment.
				-OR-
				Dial % t for next button mapping feature.
				-OR-
				Dial ++r # # for configuration mode.
\sslgn DWBLF SelectlonToButtons		1. Dial 56.				“ B U T T O N M A	PPlNG ”
		2.		Dial	03.	w A S S I G N	DSSIBLF	’
		3.		Select button to be programmed:
				- Press Al - A14, Bl - 86.
		4.		Select station port to be assigned:
				- Station 10 - 57: Dial 10 - 57.
		5.		Repeat steps 3 and 4 until all ports are assigned.
		6.		Dial	#.
		7.		Select station ports to be programmed
				with	this	DSSbutton assignment:
				- Station 10 - 57: Dial 10 - 57.
		8.		Dial	* for further DSS/button assignment.
				-OR-
				Dial * * for next button mapping feature
		.		-OR-
.				Dial t +r t for configuration mode.
Blank Buttons For User Autodlal and		1. Dial			56.	“BUTTON M A P P I N G		”
DynamicLineButtons		2.		Dial	04.	%!ANWAUTODIAL		”
N O T E W h e n	b l a n k i n g b u t t o n s , b e	3.		Select all		buttons to be programmed:
sure	a previous/y assigned			- Press Al - A14, Bl - 88.
button is idle (feature not		4.		Dial	#.
selected by user) before it is		5. Select station ports to be programmed with
b l a n k e d				this auto dial button assignment.:

-Station 10 - 57: Dial 10 - 57.

6.Dial + for further button blanking.

;.c* - O R -

Dial t t for next button mapping feature. -OR-

Dial t t t for configuration mode.