DigiTech C0408 system manual Voice Mall Port Connect, ATI Dlstlnctlve Rlnglng Intercom, I57

I					I
I	Press ITCM +k # 7 4 6 +k for base level.				I
	FEATURE	DESCRIPTION		ENTRY CODE AND PROMPTING DISPLAY
	Voice Mall Port: Connect the			1. Dial 53.					“STATION	FEATURES”
	ExecuMail	system or a model 2500		2. Dial 32.					“VOICE	MAIL PORT	”
	industry-standard telephone to a			3. Select station ports to be programmed
	stationport through the Analog				- Station 10 - 57: Dial 10 - 57
	Terminal Interface(ATI) device.			4. Dial+# fornext feature.
	Use this programming feature to					-OR-
	enable the station port forExecuMail				Dial +K + for configuration mode.
	operation (voice mail port). Disable the
	station port as a voice mail port when
	used for model 2500 telephone
	operation.
	NOTE: This feature is automatMy
	disabled if the ATI device is
	replaced		with a multiline
	telephone		at the programmed
	station port.
	ATI Dlstlnctlve Rlnglng: Intercom			1. Dial 53.					“STATION	FEATURES”
	calls that ring at equipment connected			2.	Dial 33.				“D/ST. RlNG ON		”
	through anATIdevice have a different			3.	Press		Al	to toggle between enable and disable
	cadence than outside calls have.				(LED		On	= Enable)
	Intercom ring cadence is: 1 sec. on, 0.5				-OR-
	sec. off, 1 sec. on, 3.5 sec. off.			4. Dial 1			to	Enable.	“DIST. RING ON ”
	Outside callring cadence is: 2 sec. on,				(Al LED on)
	4 sec. off. Disable this distinctive.				Dial 2		to	Disable.	“DIST. RING OFF ”
	tinging feature to make the intercom			5. Dial+K for next feature.
	ring cadence the same as that for				-OR-
	outside calls.				Dial +K + for configuration mode.

REFERENCE RECORD

TRY1 PC

25 I	I 41	I	I57 I
DEFAULT = NOT ENABLED

1 Press SPKR to end.