DigiTech C0408 system manual Station Features, Prime Line, 3a. Assign prime line, Stailine Config

k&s ITCM % # 7 4 6 +k for base level.

FEATURE DESCRIPTION

ENTRY CODE AND PROMPTING DISPLAY REFERENCE RECORD

Jrlme Llne (also prlme group or prime ntercom): A preprogrammed group of ines, an intercom line, or one individual ine can be designated to a particular ;tation where it is automatically selected or use when that station is taken >ff-hook.

Flexlble Rlnglng Asslgnments: Ringiry assignments are programmed on a per station/per line basis. Ringing is controlled for every line that has appearance at a station. Immediate, or direct, ringing can be assigned to some lines and delayed ringing to others.

NOTE: Do not program direct ringing for lines that are assigned to direct department calling.

See page 4- 18.

I. Dial 53.	“STATION FEATURES”
!. Dial 15.	“PRIME LINE	”
3a. Assign prime line.	“PRIME LINE	XX ”
-Lineporti-14=DialOl	-14orpressAl -A14

-Lineport15,16=Dial15,16orpressBl,B2. -Lineport17-24=Dial17-24

-OR-

Press HOLD then press Al - A6 lb. Assign prime group,

-Dial 51-54for gps. l-4. “PRIME L/NE GRP X k. Assign prime intercom,

-Dial 56 for intercom line. “PRIME INTERCOM

1. Select station ports to be programmed:

- Station 10 - 57: Dial 10 - 57.

i.Dial t for next prime line, group, or intercom assignment.

-OR-

Press * t for next station feature. -OR-

Press If +k If for next station feature

3lrect	Rlnglng	“STAILINE CONFIG.”
I. Dial	54.
!. Dial	1.	“DIRECT RING ”

3.Select line ports for direct ringing:

-Line port 1-14 = Dial 01 - 14 or press Al - Al4

-Line port 15, 16 = Dial 15,16 or press Bl , 82.

-Line port 17 - 24 = Dial 17 - 24

-OR-

Press HOLD then press Al - A6

1.Dial f when all line ports are selected.

5.Select station ports to be programmed:

-Station 10 - 57: Dial 10 - 57.

3. Dial * when all station ports are selected. -OR-

Dial t t for next station/line ringing assignment -OR-

Dial t +# t for configuration mode.

Continued on next page

MARK STATION/LINE RECORD 0N PAGE 4 m40

DEFAULT = NONE ASSIGNED

MARK STATION/LINE RECORD ON PAGE 4B 40

DEFAULT = ALL LINES DIRECT RING AT STATION PORTS 10 AND 17

Press SPKR to end.