DigiTech C0408 Feature Description, Hold Release, Department, Default = 50 Msec, Assignments

Press ITCM % # 7 4 6% for base level.
FEATURE DESCRIPTION							ENTRY CODE AND PROMPTING DISPLAY
4bandoned Hold Release: When a						1.		Dial 38.			“HOLD RELEASE 50 ”
listant		party abandons a hold condition					2. Select hold release time for line ports.
md	disconnects, the central office will							(LED On = 50 msec.)
;end	a	forward disconnect signal to the						Line port l-14 = Dial 01 - 14 or Press Al - Al4
;ystem.		The signal can be either 50						Line port 15,16		= Dial 15,16 or press Bl, B2
nsec. or 350 msec. in length. Program								Line port 17-24		= Dial 17	- 24
he system to match the central off ice											-OR-
ime.										Press HOLD then press Al - A8.
							3. Dial +k for configuration mode.
Direct Departmental Calling: Outside						1.		Dial 39.			“DEPT. CALLlNG ”
ines can be assigned to one of four						2.		Select	department.		“NO DEPARTMENT n
jifferent		departments.		Calls received				Dial 0	for none.
an a line assigned to				a department will				Dial 1 for dept 1.			“DEPARTMENT 1 n
7unt	for	any idle station in that						Dial 2 for dept 2.			“DEPARTMENT 2 ”
department to			ring.					Dial 3 for dept 3.			“DEPARTMENT 3 n
NOTE:		Assign	stations	to	these			Dial 4 for dept 4.			“DEPARTMENT 4 n
							3. Select line ports to be disabled
		departments pef			the procedure			(LED On = Disabled).
	,	on page 4-31.						Line port l-14 = Dial 01 - 14 or Press Al - Al4
								Line port 15, 16 = Dial 15,16 or press Bl, 82
								Line port 17-24		= Dial 17	- 24
											-OR-
										Press HOLD then press Al - A8.
							4. Dial +k for next department.
								-OR-
								Dial ++ t for configuration mode.

REFERENCE RECORD		I
PORT1 ENTRY 1PORliENTRY 1 PORTIENTRY
1	9	17 I

DEFAULT = 50 MSEC.

7	I	115	I	123	t
8		116	1	7 4	I
DEFAULT = NO DEPARTMENT/LINE
		ASSIGNMENTS