DigiTech C0408 system manual ‘EATURE Description Entry Code and Prompting Display

Press ITCM ?# # 7 4 6 +k for base level.

‘EATURE DESCRIPTION		ENTRY CODE AND PROMPTING DISPLAY					REFERENCE RECORD
Jon-Square System: Every
							SEE CHART ON PAGE 4- 49	I
)rogrammable buttons at each digital
;tations can be assigned individually
mapped) to select any line assigned to
hat station or to provide other functions.
rhese buttons can be assigned as direct
;tation select (DSS) buttons to provide
tuick access to system stations or
Issigned as idle to provide autodial
juttons for station the user. Idle buttons
31,B2,	andB3orA14,A15andAl6
ierve as dynamic line buttons. These
juttons allow the system to temporarily
assign a line appearance to a station
which normally does not have that line
assigned to it. That line will appear at a
jynarnic line button. While the line is in
appearance there, any normal call
landling operations can be performed.
defer to Flgure 4-lon page 4-50 for
Uton	locations.
Default	Button Asslgnments	1.	Dial	56.	“BUTTON MAPPING	”
		2.	Dial	01.	“BUTTON DEFAULT	”
		3. Select station ports to be defaulted:
			- Station 10 - 57: Dial 10		- 57.
		3. Dial * for next button mapping feature.
			-OR-
			Dial t f for configuration mode.
hsslgn	Llnes To Buttons	1. Dial 56.			“BUTTON MAPPING	’
		2. Dial 02.			“ASSIGN LINE	n

3.Select button to be programmed:

-Press Al - A14, Bl - B8.

4.Select line ports to be assigned.

-Line port 1-14 = Dial 01 - 14 or Press Al - A14.

			-Lineport15,16=Dial15,16orPressBl,B2
			- Line port 17	- 24 = Dial 17		- 24.	I
				. -OR-				Press SPKR to end.	I
Assign Lines To Buttons		- Continued		Press	HOLD	then press Al - A8.
- .	on	next page	5. Repeat steps 3 and 4		until all ‘. s: are assigned.