DigiTech C0408 Tone or Voice Signalling Intercom, Unanswered Call Transfer Recall Timing

,lron Of System Features lMl66-083

local calls and will only take effect when the system is placed in the night transfer (of ringing) mode.

Therefore, even though toll calls can be made from this station during daytime operation, no toll calls can be made from it when the attendant programs the system for nighttime operation using the night transfer of ringing feature.

NOTE This night mode roll restriction table assignment should nor be confused with the night transfer (of ringing) feature.

Toll restriction class of service programming is used to program the night mode toll restriction tables and to assign them to the stations.

TONE OR VOICE

SIGNALLING (INTERCOM)

Intercom calls can be tone signalled or voice signalled as desired.

Programming determines the signalling method employed as the primary method when an intercom call is made. The atternate method is available through user action at the station. Intercom call progress is marked by special tone signals. Also refer to the paragraph titled: lnrercom Call Progress Tones. The system class of service programming determines which type of intercom signalling is first option signalling for the system.

TRANSFER/CONFERENCE BUlTON

A fixed button is provided that gives quick, easy transferring and conferencing.

UNANSWERED CALL

TRANSFER RECALL TIMING

A transferred call that is unanswered after a pre-programmed length of time will return to the station that transferred ft. The system will return the call to both attendant stations when the tandem attendant feature is enabled. When LCD speakerphones are employed, the display will show the station number or name as well as the line number that is being recalled. The system class of service

programming determines the recall time for an unanswered call transfer. Refer to the discussion titled: Tandem Arrendanr.

VOICE ANNOUNCE BLOCKING

This feature allows station users to block voice announced intercom signalling by pressing a programmable button programmed for that purpose. The programmable button used to block voice signalling is enabled by station class of service programming.

VOICE MAIL TRANSFER ON BUSY

When using ExecuMail, a busy station may desire to be alerted if ExecuMail is attempting to transfer a call to that station. This feature allows a station to be programmed for this option. With this option, when ExecuMail tries to transfer a call to a station that is busy on a call (outside or intercom call) and the station has an available intercom line (stations can be programmed to have a second intercom), the intercom will ring subdued. The call can be picked up by pressing the button of the ringing intercom line. In general, attendants will probably desire this feature so they can handle multiple calls, while other station users may prefer to have a message taken when they are already busy on a call.

ZONE PAGING VIA STATION

SPEAIIERS)

Zone paging allows groups of stations to receive announcements through the station speakers. The programming can enable zone paging in up to four different zones. Zone paging can also be received at the paging port where it can be connected to the input of an external paging amplifier. The ability of each station to originate and/or receive a page and the arrangement of the paging into different zones are contrclled by station class of service programming. Zone paging through the paging port is enabled by system class of ser.&e programming. Also refer to the discussion titled: A//-Call Paging (Via Station Speakers)