DigiTech C0408 system manual Feature Benefits, VDT COS Progrw

DigiTech		System	Software	Enhancements					TAB 099
FEATURE					BENEFITS
SMDA	Reports		VDT COS PROGRW
(cont.)			Enter		COS		programming
			1.	Enter		1	for	“System	COS”
			2 .	Enter		8	for	“SMDA	Programming”
			3 .	Enter		11 for “SM DA Reports”
			4 . Enter selection for desired report:
				- press 1 for Selected Station Reports
				- press 2 for Station Reports
				- press 3 for Account Reports
				- press 4 for Line Reports
				- press 5 for Departmental Reports
				- press 6 for All Detail Records
				- press 7 for Departmental Calling Distribution Reports
				- press 8 to Display Number of Free Records
				- press 9 to Delete Records (After Next Print)
				- press 10 to Start Printing Report
				- press 11 to Stop Printing Report
				- press 12 to Return to Previous Menu
SMDA	Record		DigiTech			systems have the following SMDA record storage capacities:
Storage		Capacity	SO408		=	800 records
			SO816		=	1600		records
			S1632		=	1600		records

SMDA Reports with Refer to Figure 3 in this Technical Advisory Bulletin (under the Caller ID heading) for an example Caller ID Information of an SMDR printout with Caller ID information for incoming calls.

Forced Account ACCOUNT CODES AND ACCOUNT CODE VERIFICATION

Code Option The Account Code feature has been enhanced so that account code entry may be either forced or optional for outgoing calls. When account code verification is enabled, the system compares the account code entered by a station user with the programmed account entries. If the system does not find a match and the forced account code feature is enabled through class of service programming, the system prevents further dialing until the user enters a matching account code. For account code verification to work properly, the system programmer must maintain (within the system) a current list of valid account codes.

When a station user activates redial and auto-redial features for outgoing calls, the system will automatically reuse the last account entered at that station. Additionally, users may enter an account code before seizing a line for an outgoing call.

ACCOUNT CODE LENGTH, VERIFIED ACCOUNT CODE LENGTH AND

VALID ACCOUNT CODES

Account Code Length defines the number of digits that a user must enter before the system will accept the code. Account code length can range from 3 to 16 digits but may never be set lower than the current Verified Account Code Length.

Verified Account Code Length defines the number of digits that will be verified before a verified account code will be accepted. As well, Verified Account Code Length defines the number of

2