DigiTech C0408 system manual ‘EATURE Description, Ro program Smdr cost repoftlng, Xxxxxxxcost/Ng

f

:

r		-
	Press ITCM % # 7 4 6+# for base level.		I
	‘EATURE DESCRIPTION	ENTRY			CODE AND PROMPTING DISPLAY				REFERENCE RECORD
	itatlon Message Detall Accounting	I. Dial			75.	“SMDA PROGRAMMING”
	SMDA) Prlntout: Call cost reports,	?. Dial 13 for auto report time.
	broduced by the system for printing, are						“AUTO TIME XXXX	”
	lenerated automatically whenever the	- Dial new time in hours and minutes (HH MM
	systemdetectsthattherecordsstorage		in 24 hour time) or dial			+k	to accept current time.
	krea is ninety-five percent full. Program	3. Dial 14 for report definition.					“AUTO REPORT ”
	he system to automatically generate	1. Choose reports for printing.
	hese reports for printing at a certain time
			- Dial 1 for sta. report.			“STATION REPORT		”
	!ach day if desired.
			- Dial 2 ac’t. report.			“ACCOUNT REPORT		”
			- Dial 3 line report.				“LINE REPORT ”
			- Dial 4 dept. report.				“DEPT. REPORT ”
			- Dial 5 print ail.				“PRINT RECORDS ”
			- Dial 6 delete records. “DELETE RECORDS ”
			- Dial 7 for DCD report.				“DCD REPORT	”
		5. Dial+ for next SMDA feature.
			-OR-
			Dial +k +k for configuration mode.
	Statlon Message Detall Reportlng	ro program SMDR cost repoftlng,
	:SMDR) Prlntout: Program the system	I. Dial 77.					“SMDR PRINT	”
	‘or the SMDR to provide continuous	2. Dial 1				“XXXXXXXCOST/NG”
	xtntoutof system-wide station callactivit	3.	Press Al to toggle between enable and disable
	3s it is collected by the system if desired.		(Al LED On = Enabled).
	9dditional programmingactionwillcause				-OR-
	the printing of the cost of each reported
			- Dial 1 to enable .
	zaii to be included when the printout
				(Al LED on)			“WITH COSTING ”
	xcurs.
			- Dial 2 to disable.			“WITHOUT COSTING ”
		4. Dial +k for configuration mode.
		To program for SMDR prlntout,
		1. Dial 77.
		2. Dial 2 .					“SMDR PRINT XXX ”

3.Press Al to toggle between enable and disable (Al LED On = Enabled)

-OR-

-Dial 1 to enable printing.“SMDR PRlNT ON ” (Al LED on).

-Dial 2 to disable printing ‘SMDR /W/NT OFF”

4.Dial +k for configuration mode.

L