DigiTech C0408 I36, Default = Logical Same AS Physical, Jport 10 = STA 10, ETC, PressSPKR10end.J

Press ITCM ++ # 7 4 6 * for base level.

FEATURE DESCRIPTION

itatlon-to-Statlon Port Reasslgnment: The extension number and all other )rogrammable attributes of a station that ire initially assigned to a particular port :an be reassigned to a different port by xogramming action. This feature allows adds, moves, and changes to be made Nithout relocating the station wiring.

NOTE; Refer to automatic station

felocafion on page 4- 10 and the station connections

discussion found on page 3-6. Remember, the station IO to station port 10 assignment cannot be reassigned.

Block Programmlng: A configuration assigned to a particular station can be assigned to one other station or to an entire block of stations with one programming action.

INTRY CODE AND PROMPTING DISPLAY 1REFERENCE RECORD

_Dial 57 to re-assign station to port.		,... . -.--- . . - . _ . . - .		Y	PORT	FNTRY.
“ASSIGN	STA/PORT		2 6		4 2
			2 7		4 3
	1
!. Dial station extension number. 6610	- 7999.
			‘)Q		aa

“PHYS PORT XX

1. Dial physical port number 10 - 57.

“LOGICAL STA XX

1. Dial # to make assignment.

i. Dial ++ for configuration mode.

										51
					I	I36				5 2
		1				I 37				5 3
										5 4
						I 39				5 5
				24 I		I 4 0		I		1 5 6	I
				2 5		4 1			5 7
				DEFAULT = LOGICAL SAME AS PHYSICAL
				JPORT 10 = STA 10, ETC.)
			.				I
I. Dial 56.	“BLK PROGRAMWNG ”			MODEL STATION
2. Select model station port:				BLOCKED		STATIONS	1
- Station 10	- 57 = dial 10 - 57.
	“MODELSTA XX ”

3.Dial first station port in block (dial code as above

4.Dial ##.

5.Dial last station port in block (dial code as above

6.Dial #.

7.Dial % for further block programming.

-OR-

Dial f +Ic for configuration mode.

NOTE: The first, last and all statbn ports in between will be b/h programmed /he fhe mode/ stafion port To blocA program an individual station port, select rhe first and last port to be the same number. [For example: 25, 21% 26# programs station 26 exacffy as 25 .)

PressSPKR10end.J