DigiTech C0408 Modular Wiring and JACKSR- or Conductor Wire System, Music-On-Hold, Mute

lMl66-083 Description Of System Feat,.

programming provides a station with the ability to originate a message waiting signal and is used to create a central message desk.

MODULAR WIRING AND JACKSR- OR

4-CONDUCTOR WIRE SYSTEM

The system can be completely interconnected by employing industry standard 50-pin connectors and modular plug/jack combinations. Station wiring is

small, 2conductor, twisted-pair cable throughout the system. A 4conductor twisted-pair cable can be employed if a spare pair is required for a separate wiring purpose.

MUSIC INTERFACE EXTERNAL SOURCE

REQJ IRED)

A jack is provided on the common equipment for the connection of a customer-provided music source.

Also refer to the discussions titled: Background Music and Music-On-Hold.

MUSIC-ON-HOLD

Music is provided to outside lines that are placed on hold if an external music source is connected to the system. Refer to the discussion titled: Music Interface.

‘.

ON-HOOK DIALING

Every station provides manual and/or automatic dialing while the station handset is on-hook. An internal speaker monitors call progress for completion. (The handset must be taken off-hook to provide the voice link on non-speakerphone stations.)

ORIGINATING DENIED

The ability to originate calls on certain lines can be denied at individual stations through system programming. The originating denied feature is programmed on a per station/per line basis. Originating denied does not prevent a user from answering a ringing line, retrieving a held call or receiving a transferred call. Call origination on a line is denied at a particular station by the station class of service programming.

PBWCENTREWCO COMPATIBLE

System features and programmable buttons support the requirements of most PBXs, Central Offices, and

CENTREX systems. Numbers, # ‘s, s’s,

programmable pauses, and flash signals can be made a part of every stored number for access to host system feature codes.

MUSIC-ON-HOLD SYSTEM-WIDE

ENABLE/DISABLE

Music is provided to outside lines that are placed on hold if an external music source is connected to the system. Musicon-hold can be disabled system-wide by attendant action. Also see discussions titled: Music Interface and Music-On-Hold.

MUTE

Each station has a MUTE button which, when pressed, will mute the handset transmitter (or internal microphone on speakerphones) to prevent the user’s voice from being heard by the distant party. The MNTR (SPKR) light flutters to indicate a muted condition. The button provides push-on/push-off operation on speakerphones. No class of service is required. Also refer to the discussion titled: Handsfree Answer Inhibit.

NIGHT TRANSFER (OF RINGING)

Night transfer (of ringing) is an attendant-controlled feature that transfers the day ringing program of all incoming calls to a particular station or stations for off-hour or special purpose answering. The nfght transfer mode can only be activated from station 10 or

12.The individual lines at each station that are to be transferred with this feature are selected by station class of service programming.

PERSONALIZED RINGING TONE

This feature allows a station user to choose one of four diierent ring tones to aid in distinguishing one ringing station from another.

POOLED LINE ACCESS	’
(GROUP LINE ACCESS)
Users can dial a special access code instead of
pushing a line button to access one of up to four
different groups of lines. Lines are arranged into
groups with the line class of service programming.
POWER FAILURE TRANSFER
A power failure line connection is available for
connecting industry-standard telephones such as a
Comdial model 2500. The power-fail telephone is
automatically connected directly to a certain line
whenever there is an AC power failure. Normal
origination and reception of calls on a power-fail
station is possible during the power failure condition.
The power-fail stations will automatically disconnect as
soon as power is restored.
PRIME LINE AUTOMATIC
If a station is programmed for prime line automatic, the
designated outside line, intercom line or line group will
be automatically selected when the handset is taken