DigiTech C0408 system manual Attendant Configuration

ATTENDANT CONFIGURATION

Mark the desired selections in the charts to record programming needs.

Dial the feature code and then dial the selection code or press the programming button to program the selection.

fOTE: A current program setting is indicated by a lighted LED next to fhe programming button for that selection. When a foggle (on/off) action is provided by a single button, the lighted LED indicates when the feature is active.

:EATlJRE	DESCRIPTION	ENTRY CODE AND PROMPTING DISPLAY						REFERENCE RECORD
3ase Level: The first step in any		Press ITCM ++ #.			“CONFIG. M O D E	”
rrogramming sequence is to enter the
base level. Once in this mode,
attendant	programming can be
Wormed.							.
system Clock: The system clock		l.DialOl.			“SET CLOCK	”
naintains current date and time		J ONG FORM			SHORT FORM
nformation.	This information is	- Dial 06	- 99 for yr.	- Dial W-23 for hr.
>rovided to an LCD speakerphone for		- Dial 01	- 12 for mo.	- Dial W-59 for min.
		- Dial 01 - 31 for day		- Dial # to assign hours
#splay.
		- Dial 66	- 23 for hr.		and minutes.
		- Dial 00 - 59 for min.
		2. Dial t for configuration mode.

System Speed Dial: A special	1.	Dial	02.	“SYS SPEED DIAL		”	RECORD SPEED DIAL NUMBERS ON PAGE d-79
system-wide list of numbers can be	2.	Dial	01	- 99 for storage location. “XXXXXXXX...”
Drogrammed for automatic dialing by all	3.	Dial	#to	clear current entry.	“ L I N E : n
Jsers.	4.	Choose		line, line group, or intercom
		to be used with speed dial
		number.		“LINE	XX	”

-Line port 1-14 = Dial 01 - 14 or press Al - A14.

-Line port 1516 = Dial 15,16 or press Bl, 82.

-Line port 17-24 = Dial 17 - 24

or press HOLD, Al -		A8.
- Dial 90 for last line	“ P R I M E		LINE ”
used or prime line.
	Continued on next		page

Press SPKR to end.