DigiTech C0408 system manual Press Itcm Dial t # 7 4 6 +k, Default Toll

FEATURE DESCRIPTION				ENTRY CODE AND PROMPTING DISPLAY		REFERENCE RECORD
Base Level: The		first step in any		Press ITCM Dial t # 7 4 6 +k
xogrammingsequence is to enter the
)ase level. Once in this mode, any
desired configuration can be set.
system Default:Two toll restriction				1. Dial 70.	“DEFAULT TOLL ”
:ables are defaulted with				2. Press #to default toll tables.
xe-programmedvalues and are
xe-assignedto the lines. They need
)nlyto be assigned to the stations to put
them into effect. The defaulted tables
zanbere-programmedwithdifferent
nformationusingthenormal
Drogramming procedure.
Thepreprogrammedvaluesareas
follows:
TABLE l(Deny)		TABLE 2 (Allow)
1 1		1	1800
2 9 7 8 ’		2 911
3	411’	3
		4

These values will provide satisfactory system performance in a broad range of site applications.

Press SPKR to end.