DigiTech C0408 system manual Data Printer Service

DATA PRINTER SERVICE

When a data printer is connected to the system, the station message detail record (SMDR) for the system is printed automatically without any programming or user intervention.

The data printer can also be commanded to print the configuration data for the system.			Partial or complete printouts can be obtained as desired.
When the printer is being used to print the configuration data or SMDA information, SMDR printout is temporarily halted. The SMDR data
collection is continued by the system during this time, but if more than two calls are logged for any one line, call records may be lost.
FEATURE DESCRIPTION	ENTRY CODE AND PROMPTING DISPLAY
Base Level: The first step In any	Press	ITCM. Dial +R # 7 4 6 *.
programming sequence is to enter the
base level. Once in this mode, the
printing of configuration data can be
commanded.
Enable data prlnter opmtlon	1. Dial	91.	“PRINT CONFIG. ”
	2. Choose configuration:
	Dial 1 to print all configuration data.		“PRINT ALL ”
	Dial 2 to print system data.		“PRINT SYSTEM ”
,	Dial 3 to print line data.		“PRINT LINES	”
	Dial 4 to print data for all stations.		“PRINT STATIONS ”
	Dial 5 to print data for selected station.		“PRINT STA. n
	Select station to be printed.		“PRINT STA. XXX	”
		- Dial lo-57 for stations 10 - 57.
	Dial 6 to print toll restriction assignment.		“PRINT TOLL	”
	Dial 7 to abort printing		“ABORT PRINT	”
	Dial + for configuration mode.