DigiTech C0408 Feature Benefits, Cross Connects, DIgiTech CommonEquipmeni, Caller ID Unit

i TAB 099DigiTech System Software Enhancements

FEATURE	BENEFITS
,- ‘rer ID (cont.)	INSTALLATION NOTES

All Caller ID features require the delivery of Caller ID data to the input Port B. This port must be configured to match the output of the Caller ID decoder device. The recommended configuration is 9600 baud, with eight data bits and one stop bit. You can configure the port either from the terminal Class of Service programming menus, or from station 10 or 12.

You have the option to provide Caller ID Distribution through the W-232 port (Port B), over which SMDR information is delivered. Caller ID Distribution is in the form of messages which specify

the Caller ID data for lines with incoming calls, and identify the stations answering such lines. The data is in ASCII, formatted for use with PC-based application programs.

Figure 1 shows system configuration. Figure 2 illustrates the Printer-to-Port B connection.

To C. 0.

IIIIIIII~ Lines to Common

Equipment

Cross Connects	.
	.

		To	120V	AC	Customer-
Modular Cord		Outlet			Supplied
			.
						Cable
		. * . t . . . •	.
		8 7 6 5 4 3 2 1	PWR	IN	OUT
		Ports		RS-232 RS-232
		CID08 Caller ID Unit
	I

DIgiTech

CommonEquipmeni

Figure 1. System Configuration --l--El

A

90

04

8@

O-Pin03

MALE

D-sub 7.

02

6.

Solder Cup Side

Caller ID Unit	I
	;	TD
RS-232 OUT	3
MALE	2	SG
g-PIN, “D” -sub
	6
	7	3
	8
	9

I

-7:

S G

-

Common Equipment

RS-232 Data Port B

IIPrinter PIN

Figure 2. Caller ID Unit and Printer to Common Equipment Through Data Port B

9