MENU |
| DESCRIPTION |
|
|
|
Self Diagnosis | • | <Picture Test> |
|
| If you think you have a picture problem, perform the picture test. Check the colour pattern on the |
|
| screen to see if the problem still exists. |
|
| • <Yes> : If the test pattern does not appear or there is noise in the test pattern, select <Yes>. |
|
| There may be a problem with the TV. Contact Samsung‘s call centre for assistance. |
|
| • <No> : If the test pattern is properly displayed, select <No>. There may be a problem with your |
|
| external equipment. Please check your connections. If the problem still persists, refer to the |
|
| external device‘s user manual. |
| • | <Sound Test> |
|
| If you think you have a sound problem, please perform the sound test. You can check the sound by |
|
| playing a |
|
| • <Yes> : If during the sound test you can hear sound only from one speaker or not at all, select |
|
| <Yes>. There may be a problem with the TV. Contact Samsung’s call centre for assistance. |
|
| • <No> : If you can hear sound from the speakers, select <No>. There may be a problem with |
|
| your external equipment. Please check your connections. If the problem still persists, refer to |
|
| the external device’s user manual. |
|
| • If you hear no sound from the TV‘s speakers, before performing the sound test, make |
|
| sure <Speaker Select> is set to <TV speaker> in the <Sound> menu. |
|
| • The melody will be heard during the test even if <Speaker Select> is set to <External |
|
| Speaker> or the sound is muted by pressing the [MUTE] button. |
| • <Signal Information>(digital channels only) | |
|
| Unlike analogue channels, which can vary in reception quality from snowy to clear, digital (HDTV) |
|
| channels have either perfect reception quality or you will not receive them at all. So, unlike |
|
| analogue channels, you cannot fine tune a digital channel. You can, however, adjust your antenna |
|
| to improve the reception of available digital channels. |
|
| If the signal strength meter indicates that the signal is weak, physically adjust your antenna to |
|
| increase the signal strength. Continue to adjust the antenna until you find the best position |
|
| with the strongest signal. |
|
|
|
Software Upgrade | • | <By USB> |
|
| Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV. |
|
| Please be careful not to disconnect the power or remove the USB drive while upgrades are being |
|
| applied. The TV will turn off and turn on automatically after completing the firmware upgrade. |
|
| Please check the firmware version after the upgrades are complete (the new version will have a |
|
| higher number than the older version). |
|
| When software is upgraded, video and audio settings you have made will return to their default |
|
| (factory) settings. We recommend you write down your settings so that you can easily reset them |
|
| after the upgrade. |
| • | <By Channel> |
|
| Upgrades the software using the broadcasting signal. |
| • | <Standby Mode Upgrade> |
|
| To continue software upgrade with master power on, select on by pressing the ▲ or ▼ button. 45 |
|
| minutes after entering standby mode, a manual upgrade is automatically conducted. Since the |
|
| power of the unit is turned on internally, the screen may be on slightly for the LED product. This |
|
| phenomenon may continue for more than 1 hour until the software upgrade is completed. |
| • | <Alternative Software>(Backup) |
|
| If there is an issue with the new firmware and it is affecting operation, you can change the software |
|
| to the previous version. |
• If software was changed, existing software is displayed.
•You can change current software to alternative software by ‘<Alternative Software>’.
Using the Product |