MENU |
| DESCRIPTION |
|
| |
Auto Adjustment | The values of <Fine>, <Coarse> and <Position> are adjusted automatically. | |
| By changing the resolution in the control panel, auto function is performed. | |
|
| Available in <PC> Mode Only |
|
| Press the [TOOLS] button to display the Tools menu. You can also set the auto adjustment by |
| selecting <Tools> → <Auto Adjustment>. | |
|
|
|
Screen | • | <Coarse> |
|
| Removes noise such as vertical stripes. |
|
| <Coarse> adjustment may move the screen image area. You may relocate it to the center using |
|
| the horizontal control menu. |
| • | <Fine> |
|
| Removes noise such as horizontal stripes. |
|
| If the noise persists even after <Fine> tuning, repeat it after adjusting the frequency (Coarse). |
| • | <PC Position> |
|
| Adjusts the screen location horizontally and vertically. |
| • | <Image Reset> |
|
| Image parameters are replaced with the factory default values. |
|
| Available in <PC> Mode Only |
|
|
|
Picture Options | • | <Colour Tone> |
|
| The tone of the Colour can be changed. |
• Available in <PC>, <DVI> mode only
•Not available when <MagicBright> is <Dynamic Contrast>.
•<Cool> - <Normal> - <Warm> - <Custom>
•
Adjusts the individual R, G, B (Red, Green, Blue) Colour controls.
Not available when <MagicBright> is <Dynamic Contrast>.
•<Size>
You can switch the Size.
•<16:9> - <4:3>
Press the [TOOLS] button to display the Tools menu. You can also set the auto adjustment by selecting <Tools> → <Picture Size>.
Picture Reset | Picture parameters are replaced with the factory default values. |
| • <Reset Picture Mode> - <Cancel> |
Using the Product |