Sanyo DSR - 300 manual Names and Functions of Parts, Front panel

3NAMES AND FUNCTIONS OF PARTS

Front panel

1	2	3	4		5			6	7	8	9
	10	11	12 13 14	1516 17	18 19	20	21	22	23		24

1.[STILL] button

Pauses the screen image when pressed during playback. Pressing the button again restarts playback.

2.[PLAY/STOP] button and indicator

Plays back the normal image (indicator lights). When pressed during playback, stops playback.

3.[REC/STOP] button and indicator

Starts normal recording. Indicator lights during recording. During recording, pressing the button for at least 2 seconds stops recording and turns off the indicator.

4.[COPY] button (JP. 36)

Copies images to the hard disk’s archive area, to a CompactFlash card, or to a Microdrive.

5.Removable HDD tray

6.HDD indicator

Lights up to indicate that data transfer between the unit and HDD is enabled.

7.Tray release key

Turns power supply to the HDD ON and OFF. When the key is turned clockwise, the HDD indicator will light up indicating the ON condition. When OFF, the tray can be removed. See caution for the key operation. (JP. 11)

8.HDD access indicator

Lights up to indicate the reading or writing of data.

9.[CHANGE DISK] button and indicator (JP. 18) The red indicator lights when the power is turned ON. When this button is held down for 2 seconds, the green indicator flashes then lights, and the HDD can be removed. If an HDD or fan error occurs, the red indicator flashes.

10.[TIMER] button (JP. 23)

When pressed while recording is stopped, the unit enters timer record standby. When the set time arrives, the digital video recorder starts timer recording.

11. [ALARM] button (JP. 30)

When the [ ] or [ ] button is pressed during playback, the unit skips to the next earlier or later alarm.

12. [SEARCH] button (JP. 29)

zWhen the button is pressed while recording or stopped, the search setting screen is displayed.

zWhen the button is pressed during the playback of frame-recorded images, the playback mode is toggled between Frame and Field.

13. [MENU] button

Used to display the menu screens.

[CHANNEL] button (JP. 28)

When a multiplexer capable of decoding channel information (i.e., camera numbers) is connected to the unit, a channel can be specified for single-channel playback using this button.

14. [MENU RESET] button (JP. 43)

Used to initialize the currently displayed sub-menu settings.

In addition, this button can also be pressed while the normal screen is displayed to make time adjustments.

15. [REVIEW/CLEAR] button (JP. 26)

When pressed during playback, lets you fast-rewind the image while watching it on-screen. When pressed while the image is still, reverse playback is performed. Also used for menu screen operations.

16. [ ] button

Used to move the cursor in menu screens down. Also used to change setting values.

Used for frame advance (reverse) and adjusting the CUE/ REVIEW speed. Also used to set the security lock.

English 13