Sanyo DSR - 300 manual Preparing for USE, Operation display area

1PREPARING FOR USE

Operation display area

Whenever the power is turned ON, the operation display area will be displayed at the top left of the monitor screen. This area indicates the date and time, the image quality, the recording rate, and other information needed for operation.

(1) (2) (3) (4) (5)

CH 4	z	100%		z
05-10-04	ALARM 0001		01- 01- 04	ALARM 0001
			00: 00: 00	EN	10FPS
10:50:00	EN	10FPS

(6) (7) (8)

(1) Camera number display (JP. 28)

Displayed when a camera number has been specified for playback.

(Only in cases where a multiplexer capable of decoding channel information is connected to the unit.) (JP. 52)

(2)Date display (JP. 22) Shows the month/day/year.

01-01-04 (month-day-year)

(3) Operating symbol display

Displays the current operation (such as recording or playback).

: Recording	: Fast-forward playback
: Playback	: Fast-rewind playback
: Reverse playback	: Slow playback
: Still	: Reverse slow playback

zDuring simultaneous recording and playback, the display indicates playback ( ).

(4)Remaining memory in recording area (JP. 57) Displays the remaining memory as a percentage when overwriting in the normal recording area or the alarm recording area is forbidden. To change the remaining- memory display format, follow the instructions in “4. RECORDING CONDITIONS SET” from the menu.

(5)Alarm display and alarm count display (JP. 24) When you set an alarm using the “ALARM REC MODE SET” menu item, the alarm display area displays the following information.

z When alarm recording is set; “ALARM” is displayed.

“ALARM” is flashed during alarm recording. z When pre-alarm recording is set;

“PRE” is displayed.

When an alarm occurs, “PRE” disappears, “ALARM” is displayed, and the number of alarms is shown. The total number is indicated in the alarm display.

z When performing playback from the archive area; “ARCHIV” is displayed.

(6)Time display (JP. 22)

“00:00:00” is displayed when you turn the power ON for the first time. The digital video recorder uses the date and time to manage recording and playback points.

(7) Image quality display (JP. 59)

Displays the quality of the image that can be recorded on the hard disk. Set to “EN” (Enhanced) in the default settings.

Setting	Description
SF	Super Fine
FI	Fine
EN	Enhanced
NO	Normal
BA	Basic

(8) Recording rate display (JP. 46)

Displays the recording rate that can be recorded on the hard disk. The default setting is 10.00 FPS (for field recording).

zAlthough operations such as playback, copying, and data transfer are possible while recording, this unit gives priority to recording and other operations may be delayed as a result. Communication may be cut off in some cases.

English 19