Specifications
Table 6 | ETEP Feature Summary | ||
|
|
| |
Category |
| Feature | |
Device Management | • | EncrypTight Manager software for device and policy | |
|
|
| management |
|
| • | |
|
| • Alarm condition detection and reporting | |
|
| • | Syslog support |
|
| • SNMPv2c and SNMPv3 managed object support | |
|
| • | Audit logging |
|
| • Management access using X.509 v3 digital certificates | |
|
| • Security options include TLS, SSH, IKE/IPsec | |
Network Support | • | Ethernet | |
|
| • | VLAN tag preservation |
|
| • | MPLS tag preservation |
|
| • | Jumbo frame support |
|
| • Link state | |
|
| • | IPv4 |
|
| • IPv6 (Layer 2 Ethernet encryption mode) | |
|
| • | NTP |
|
| • Host or gateway packet reassembly option | |
Policy Selector Options | • | Source or destination IP address | |
|
| • Source or destination port number | |
|
| • Protocol ID (Layer 3 IP packet and Layer 4 payload options) | |
|
| • VLAN ID (Layer 2 encryption option) | |
|
| • | Multicast address |
|
|
|
|
Specifications
This section lists the mechanical and environmental specifications for the following ETEP models:
•ET0010A specifications are listed in Table 7
•ET0100A specifications are listed in Table 8
•ET1000A specifications are listed in Table 9
•ET10000A specifications are listed in Table 10
Table 7 ET0010A Mechanical and Environmental Specifications
Category
Interfaces
Specification
(2)10/100 Mbps Ethernet ports for encrypting and decrypting traffic
(1) 10/100 Mbps Ethernet auxiliary port
10/100/1000 Mbps
ETEP Installation Guide | 21 |