Black Box ET10000A, ET0010A manual To install the ET1000A in a rack, Mounting bracket orientation

Installing the ET1000A

To install the ET1000A in a rack:

1Place the unit on a solid surface, with the top facing up. Position the mounting brackets on each side of the appliance, as shown in Figure 29.

Figure 29 Mounting bracket orientation

2Attach the mounting brackets to each side of the unit using the 8 small black screws provided in the accessory kit, and a #1 Phillips screwdriver, as shown in Figure 30.

Figure 30 Each bracket is attached to the side of the ET1000A using four screws

3Attach the mounting brackets to the rack’s front support with the large #10-32 screws, using a #2 Phillips screwdriver. Insert two screws in each bracket, using the top and bottom holes (Figure 31).

Figure 31 Front view of mounting brackets

ETEP Installation Guide 43