|
|
|
| ET10000A Physical Description |
|
|
|
|
|
| Table 4 | ET10000A Front Panel LED Indicators | ||
|
|
|
| |
| Indicator Light | State | Indication | |
| Gigabit link status (green)a | Off | Loss of signal on the Gigabit link. | |
|
|
| On | The Gigabit link is up but no traffic is passing over the |
|
|
|
| interface link. |
|
|
| Blinking | Indicates the presence of traffic on the Gigabit link. |
| Power supply status | Off | Power supply is not operational. Possible causes include | |
|
|
|
| power supply unplugged, power supply removed from |
|
|
|
| chassis, or a malfunction. |
|
|
| On | Power supply is operational. |
|
|
|
|
|
a. Gigabit links include the remote and local data ports, gigabit Ethernet management port, and Aux1 port.
Rear Panel
The ET10000A rear panel is shown in Figure 13.
Figure 13 ET10000A Rear Panel
Elements of Figure 13:
1)Fans
Power Supply # 2
2)Power supply 2 receptacle
4)Release lever for power supply 2
5)Status LED for power supply 2. Green indicates normal operation. Red indicates a power fail state.
Power Supply # 1
3)Power supply 1 receptacle
6)Release lever for power supply 1
7)Status LED for power supply 1. Green indicates normal operation. Red indicates a power fail state.
ETEP Installation Guide | 19 |
