Black Box ET10000A, ET1000A, ET0010A Screw holes for rubber feet installation on bottom of unit

Figure 19 Screw holes for rubber feet installation on bottom of unit

3Place one of the rubber feet over the hole and insert a screw into the opening (Figure 20). Tighten the screw.

Figure 20 Rubber feet installed

4Repeat step 3 for the remaining feet.

5Turn the unit over so that it is resting on the rubber feet.

6Attach the external power supply to the power connector on the rear panel.

Figure 21 shows the ET0010A-402 rear panel and power supply. On the ET0010A, the power connector is located on the right side of the rear panel.

ETEP Installation Guide 33