Klipsch SB3 owner manual PAcking List

Models: SB3

1 36
Download 36 pages 1.49 Kb
Page 5
Image 5
PAcking List

PAcking List

1.Soundbar

2.Wireless subwoofer

3.Soundbar power supply/power cord

4.Subwoofer power cord

5.4.9 foot (1.5m) Digital optical cable

6.Dual RCA Cable

7.Two Cradles

8.One Remote Control

9.Quick Setup Guide

10.Soundbar wall-mount template

11.This Owner’s Manual

Subwoofer Rear

SUBWOOFER

 

 

VOLUME

 

MIN

MAX

 

POWER

 

 

ON

OFF

AC~100-240V

 

 

50/60Hz

 

 

90W

Volume Control

Status Light

Main Power ON/OFF

Power Cord Input

Soundbar Front

Status Lights

Source

Mute

Volume Down Volume UP

Soundbar Status Light (Right status light, unless stated)

Subwoofer Status Light

BLUE (Solid): Receiving wireless signal from soundbar

RED (Solid): Searching for soundbar wireless signal

RED: In STANDBY (“Sleep”) Mode

GREEN: On Digital Optical Cable Input

ORANGE: On Analog RCA L/R Input

ORANGE (Flashing): RCA Input muted

GREEN (Flashing): Digital Input muted

RED (Flashing): Failure to learn a remote control command

GREEN OR ORANGE FLASHES: A remote control signal has been received

BLUE:

On 3.5 mm Analog Input

RED and GREEN (Alternating):

Remote Programming

WHITE (Left Status Light):

In 3D Surround Mode

Placement/Installation

1.Placing/wall-mounting the soundbar: The soundbar is designed to be placed on a flat surface directly in front of your TV on its two supplied cradles, on a shelf direct- ly above or below your TV in a piece of furniture or wall-mounted (via keyholes on the rear of the soundbar) under a TV that is also wall-mounted. If wall-mounting, first, use the supplied wall-mount template to mount soundbar. If the two mounting holes drill into wall studs, screw two wood screws in those holes to hang the sound- bar on. If there are no wall studs where the holes are drilled, use wall anchors that support at least 7 pounds (3kg) each to hang the soundbar on. Connect cable from TV (see Connection section) to soundbar and hang soundbar on wall.

Soundbar Rear

 

 

 

 

Analog RCA Inputs

 

Power Supply Input

1 SOURCE 2

DC IN

R

 

 

 

 

 

 

POWER

 

24V – 2.5A

 

 

L

60W

OFF

ON

 

Digital Optical

Main Power

Cable Input

 

Soundbar Right Side

3.5mm Analog Input

TV

TV

2.Placing the subwoofer: The subwoofer is designed to be placed on the floor in the same room within 50 feet (15m) of the soundbar near an electrical outlet. For maximum bass output, place the subwoofer in a corner on the same wall as the TV and soundbar. Once the soundbar has been connected to the TV and plugged into a wall outlet, plug the subwoofer into a wall outlet.

Page 5
Image 5
Klipsch SB3 owner manual PAcking List